Aviation Safety Inspector (Manufacturing)

Summary

Join the Federal Aviation Administration as an Aviation Safety Inspector - Manufacturing. The FAA work environment is rich in opportunity, diversity, teamwork and work life balance. Enjoy benefits such as weekends off, paid holidays, steady work hours, sick/annual leave, health insurance and more! Begin a rewarding career with the FAA and be part of a select group of individual whose mission is to provide the safest, most efficient aerospace system in the world.

Duties

The Aviation Safety Inspector (ASI), when assigned as a Principal Inspector (PI), has certificate management responsibility for one or more aerospace organizations. The inspector is involved in the planning and implementation of a full range of manufacturing inspection, type, production, and airworthiness certification programs at one or more aerospace organizations within a Certificate Management Sections (CM), geographic area of responsibility. Duties at the FG-12 grade level include but are not limited to the following: Verifies assigned aerospace organizations comply with Title 14 Code of Federal Regulations (14CFR) with respect to production, original airworthiness, and certification programs. Determines certificate management actions for audits of assigned aerospace organizations within personnel and budget limitations. Establishes certificate management actions in terms of kind and areas of audit, location, and frequency that will be most productive to assure adherence to the aerospace organization's quality system and conducts audits in accordance with FAA Orders 8120.22 Production Approval Procedures, 8120.23 Certificate Management of Production Approval Holders, and other established policies. Serves as manufacturing expert in the investigation of violations, accidents, incidents, and malfunctions/defects that may be attributable to items manufactured in assigned organizations. Duties at the FG-11 grade level include but are not limited to the following: Assists in the planning and implementation of a full range of manufacturing inspection, continued operational safety, certificate management activities, safety management system activities, and designee and/or delegation oversight, as well as provides input on regulatory development and type and production certification projects. Under the guidance of a more experienced ASI, may review proposals for new or revised manufacturing processes and specifications and discuss approval with the principle ASI to determine compliance to applicable FAA policy and guidance. With moderate guidance provided by the CM Sections Manager, SASI, or other journeyman ASIs, the ASI determines if quality management systems implemented at aerospace organizations are adequate.

Requirements

We are not accepting applications from noncitizens.

Qualifications and evaluation

IMPORTANT: Applicants may be rated on the extent and quality of experience, education, and training relevant to the duties of the position(s). All answers provided in the on-line process must be substantiated. Ensure that your application package/resume supports your responses.

Education

No education substitution for qualifications for this position. Must be high school graduate or equivalent.

How to apply

Applicants may be required to complete one or multiple assessments as part of the evaluation process. This assessment aims to evaluate the competencies and qualifications essential for the position. You must apply online to receive consideration. Your application must be submitted by 11:59 PM Eastern Time on the Close Date for it to be accepted. If you are applying for positions associated with FAA registers, your application must be submitted at the time a referral list is created in order to receive consideration for positions associated with a register. RESUMES ARE LIMITED TO TWO PAGES. IN DESCRIBING YOUR WORK EXPERIENCE AND/OR EDUCATION, PLEASE BE CLEAR AND SPECIFIC AND INCLUDE INFORMATION AS IT RELATES TO THE QUALIFICATIONS AND SPECIALIZED EXPERIENCE REQUIREMENTS OF THIS POSITION. Please ensure EACH work history includes ALL of the following information: Job Title (include series and grade if Federal Job) Relevant work experience: should align to the Job Announcement and address all required qualifications and include job title, employer name, start/end dates, number of hours worked per week. Education, certification or licensure: If required, education should include school/institution name, completion date, degree type and GPA. Determining length of General or Specialized Experience is dependent on the above information and failure to provide ALL of this information may result in a finding of ineligible. You may upload completed documents to your USAJOBS Account. This will provide you the opportunity to utilize the uploaded information again when applying for future vacancies.

Required documents

Detailed two page resume with clear job duty descriptions related UAS operation and integration, the manufacture of products and/or articles that demonstrates the ability to determine whether aircraft and related products meet the approved design criteria aircraft airworthiness, or the actual issuance of airworthiness certificates or the original export airworthiness approvals for products and/or articles. All Veterans: If you are claiming veterans' preference, you must submit either a DD Form 214 Certificate of Release or Discharge from Active Duty (Member 4 Copy or equivalent), or a document from the armed forces certifying that within 120 days you are expected to be discharged or released from active duty service under honorable conditions. If you are claiming 10 point preference, you must also submit a completed SF-15, Application for 10-Point Veteran's Preference, and supporting documents outlined on the SF-15. Documents must be uploaded or faxed to the Servicing Human Resource Management Office listed in this announcement and all documents must be received by the closing date of the announcement. If you fail to submit documentation, you will be assessed as a non-veteran. If you are claiming 10 point preference but fail to submit the supporting documents outlined on the SF-15, you will be tentatively assessed as a 5 point preference eligible provided your DD Form 214 reflects that you have the service required to qualify for preference. Documents must be uploaded or faxed to the Servicing Human Resource Management Office listed in this announcement and all documents must be received by the closing date of the announcement. If you fail to submit documentation, you will be assessed as a non-veteran. Veterans currently on active duty claiming veterans' preference: You will be granted tentative preference if you submit a document from the armed forces certifying that within 120 days you are expected to be discharged or released from active duty service under honorable conditions and your application shows that you have the required service. Prior to being appointed, you must provide to the Servicing Human Resource Management Office a DD Form 214 documenting discharge/release and showing that the service was honorable or general. If you are on terminal leave, you must provide documentation certifying authorized terminal leave.

Additional information

We may use this vacancy to fill other similar vacant positions. Position may be subject to a background investigation. A one-year probationary period may be required. The person selected for this position may be required to file a financial disclosure statement within 30 days of entry on duty. FAA policy limits certain outside employment and financial investments in aviation-related companies. www.faa.gov/jobs/workinghere/financial-disclosure-requirements Incomplete Applications: Please follow all instructions carefully. Errors or omissions may affect your rating. Interviews: Interviews may be conducted via Zoom to determine whether they possess the necessary qualifications, competencies and personal qualities to successfully perform Aviation Safety Inspector duties. Applicants will be questioned about information on their applications and will be required to show appropriate airman certificates or other appropriate documents. Requirement for Security Clearance: Selection and placement are contingent upon waiver or completion of satisfactory security requirements. For Moderate Risk (Level 5), this position requires completion and favorable adjudication of a National Agency Check with Inquiry (NACI) background investigation prior to appointment, unless a waiver is obtained. These positions are represented by Bargaining Unit: 0104 - PASS: Certificate Management Sections Links to Important Information: Locality Pay, COLA