COST ANALYST / COST ESTIMATOR
STRATEGIC SYSTEMS PROGRAMS (SSP)
Get more Mechanical Engineering openings
A short daily email when similar roles appear in Washington, District of Columbia. No account needed.
Summary
This is a public notice flyer to notify interested applicants of anticipated vacancies. Applications will not be accepted through this flyer. Interested applicants must follow the directions in the "How to Apply" section of this flyer to be considered. There may or may not be actual vacancies filled from this flyer. Notice of Result letters will not be sent to applicants who respond to this flyer.
Duties
You will serve on a multi-disciplinary team providing scientific, technical, and professional cost guidance on all aspects of purchasing and procurement programs. You will review and assess overall program progress and develop cost estimates and analyses based on planned technical and schedule parameters. You will ensure cost analyses are based on current program information by working with engineers, project team leaders, and contractor representatives. You will prepare and defend program plans to develop funding requirements and long-term cost profiles, and track financial performance for assigned programs. You will assemble and provide information and advice regarding assigned program areas to senior leaders and management. You will maintain technical expertise through professional education, training, conferences, and collaboration with other Navy and DOD organizations.
Qualifications and evaluation
In order to qualify for this position, your resume must provide sufficient experience and/or education, knowledge, skills, and abilities to perform the duties of the specific position for which you are being considered. Resumes are restricted to no more than 2 pages. Illegible/unreadable resumes will not be considered. Your resume is the key means we have for evaluating your skills, knowledge, and abilities as they relate to this position. Therefore, we encourage you to be clear and specific when describing your experience. As vacancies occur, the Human Resources Office will review your resume to ensure you meet the hiring eligibility and qualification requirements listed in this flyer. You will be rated based on the information provided in your resume, along with your supporting documentation. If selected, you may be required to provide additional supporting documentation. If after reviewing your resume and supporting documentation, a determination is made that you inflated your qualifications and/or experience, you may be found ineligible/not qualified. Please follow all instructions carefully. Errors or omissions may affect your rating or consideration for employment. All qualification requirements must be met before being considered for any vacancies.
Education
For the 08XX - Professional Engineering Series: Professional Engineering Series (08XX) - Degree: A professional engineering degree from an ABET-accredited college or university; OR a degree with curriculum in differential and integral calculus, with additional courses in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics; or electronics; OR Professional Engineering Series (08XX) - Substitution of Education/Experience: A combination of education and experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying professional engineering; and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: (a) professional registration, (b) evidence of successfully passing the Engineer-in-Training (EIT) examination; (c) successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified above; or (d) successful completion of a curriculum leading to a bachelor's degree in engineering technology or in an appropriate professional field, e.g., physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering provided that it included at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. (Note to Applicants: Please see the Qualifications & Education sections of this announcement for a link to the Office of Personnel Management (OPM) Individual Occupational Requirements. OPM guidance indicates that there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience. This training plan or experience must be well documented and provided at time of application.) For the 1515 series: Degree: in operations research; or at least 24 semester hours in a combination of operations research, mathematics, probability, statistics, mathematical logic, science, or subject-matter courses requiring substantial competence in college-level mathematics or statistics. At least 3 of the 24 semester hours must have been in calculus.
How to apply
Interested Applicants must submit resumes/application packages to: Matthew.Lewis@ssp.navy.mil - Please reference the control number 879946000 in any correspondence regarding this announcement. Facsimile applications will not be considered. All resumes/applications must be received no later than the close date of this flyer. Resumes are restricted to no more than 2 pages. Illegible/unreadable resumes will not be considered. It is the applicant's responsibility to verify that all information in their resume and documents, are received, legible, and accurate. HR will not modify answers/documents submitted by an applicant. Failure to submit a complete application package will result in an ineligible rating and loss of consideration.
Required documents
A complete resume is required. Resumes are restricted to no more than 2 pages. Illegible/unreadable resumes will not be considered. Your resume must show relevant experience, job title, duties and accomplishments. Your resume must show complete information for each job entry to support minimum qualifications. The following information should be provided in your resume: employer's name, starting and end dates (Mo/Yr), hours per week if experience was less than full time (35-40 hours per week), and pay plan, series and grade level (e.g. GS-0201-09) for relevant federal experience. TIP: A good way to ensure you include all essential information is to use the Resume Builder in USAJOBS to create your resume. Are you claiming membership in any professional organizations, or possession of a license, certificate or credentials? Check the Conditions of Employment section above to see if any are required. If you claim membership, license, certification, or credentials, you must submit a copy of said document in your application package. Are you using education as a substitute for some or all of the experience requirement? Is there a basic education requirement for this position? Check the Education section above to see what is allowed and what is required. Any claims you make in your resume or assessment questionnaire regarding education or degrees MUST be supported by submitting with your application official or unofficial transcripts or a list of courses, grades earned, completion dates, and quarter and semester hours earned issued from your school. While unofficial transcripts are acceptable for initial application, an official transcript will ultimately be required if you are selected for the position. You may submit a copy your degree(s) if specific coursework does not have to be verified. Are you a veteran claiming 5-point veterans' preference or claiming sole survivorship preference? You must submit a copy of your latest DD-214 Certificate of Release or Discharge from Active Duty (any copy that shows all dates of service, as well as character of service [Honorable, General, etc.] is acceptable) OR a VA letter that shows dates of service or service connected disability AND character of service. If you have more than one DD-214 for multiple periods of active duty service, submit a copy for each period of service. If you were issued a DD-215 to amend aforementioned information on the DD-214 you must submit that too. If you are not sure of your preference eligibility, visit the Department of Labor's website: Veterans' Preference Advisor Are you a disabled veteran or claiming 10-point veterans' preference? If you are eligible to claim 10 point veterans preference you must submit a DD-214 Certificate of Release or Discharge from Active Duty as described above for 5-point preference. You must also provide the applicable supporting documentation of your disability (e.g. disability letter from the VA) as described on Standard Form-15 (SF-15). http://www.opm.gov/forms/pdf_fill/SF15.pdf. Are you an active duty service member? Active Duty Service Members are required to submit a statement of service printed on command letterhead and signed by the command. The statement of service must provide the branch of service, rate/rank, all dates of service, the expected date of discharge and anticipated character of service (Honorable, General, etc.). Application documents, including supplemental ones, may be shared outside the Human Resources Office. Supplemental documents may contain your SSN, DOB, or personal information of others (e.g., on military orders, marriage certificates). You may redact this information before submitting; however, if selected, you must provide unredacted originals.
Additional information
This announcement uses the Acquisition Workforce Personnel Demonstration Project (AcqDemo) Business & Technical Management direct hire authority to recruit and appoint qualified candidates to certain positions in competitive service. This position is part of the Department of Defense Civilian Acquisition Workforce Personnel Demonstration Project. The NH-3 broadband level encompasses positions equivalent to GS-12 and GS-13. This position is covered by the Department of Defense Priority Placement Program. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. Several vacancies may be filled. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf. Veteran's preference does not apply when selecting individuals under this specific hiring authority. However, if you claim veteran's preference, you will be required to submit supporting documentation with your application as described in the Required Documents section below.
The average job posting receives 250 applications.
Stand out by tailoring your resume to this specific role. Our AI resume builder highlights the skills and experience that matter most to this employer.
More open roles at STRATEGIC SYSTEMS PROGRAMS (SSP)
PROGRAM ANALYST
Washington Navy Yard, District of Columbia
ENGINEERING TECHNICIAN
Bangor, Washington
PAESSP DEPUTY CHIEF ENGINEER
Washington Navy Yard, District of Columbia
PRODUCTION CONTROLLER
Kings Bay, Georgia
ELECTRONIC SECURITY SYSTEM SPECIALIST
Bangor, Washington
HUMAN RESOURCES SPECIALIST
Washington Navy Yard, District of Columbia
More mechanical engineering roles in Washington, District of Columbia
General Engineer (Open to both U.S. Citizens and Federal Employees)
Office of the Secretary of Transportation
Supervisory Senior Construction Engineer
Smithsonian Institution
Deputy Associate Administrator for Programs
Headquarters, NASA
General Engineer
Bureau of Industry and Security
General Engineer
Federal Energy Regulatory Commission
Fire Protection Engineer
Office of the Secretary