ELECTRONIC MEASUREMENT EQUIPMENT MECHANIC (TITLE 32)

Summary

THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION. This National Guard position is for a ELECTRONIC MEASUREMENT EQUIPMENT MECHANIC (TITLE 32), Position Description Number D1201000 and is part of the IL CSMS 1, National Guard.

Duties

As a ELECTRONIC MEASUREMENT EQUIPMENT MECHANIC (TITLE 32), WG-2602-11, you will perform calibration, diagnostics repair, and certification of electronic, mechanical, and radiation Test Measurement and Diagnostic Equipment (TMDE). Major Duties - This is NOT an all-inclusive list: Calibrates and repairs TMDE within support capability and authority including various levels of calibration as designated in technical bulletins, manuals, etc. Performs functional electronic, physical, and radioactive testing involving interpretation and analysis of measurement data, in accordance with cyclic inspection requirements. Aligns, troubleshoots, tests, inspects, repairs, modifies, calibrates and certifies precision measurement equipment such as multimeters, microwave equipment, oscilloscopes, temperature analyzers, mercurial barometers, gage blocks and micrometer caliper dimensional equipment, digital voltmeters, signal generators, torque wrenches, pressure gauges, torque testers, weight scales, electronic counters, radiation monitors, radix calibrators, and radiation dosimeters. Analyzes and isolates component malfunctions; calculates and determines tolerances; and performs tests and calibrations in accordance with instructions, which are often vague and incomplete, and may require the preparation of diagrams and instructions to facilitate the calibration action. Sets up system test sets and various types of test equipment such as frequency meters, standing wave ratio meters, radio frequency (RF) power meters, function/ arbitrary waveform generator, distortion analyzers, time frequency work stations, oscillators, voltmeters, electronic counters, oscilloscopes, attenuators, decade resistors and capacitors, signal generators, stroboscope, tachometers, pneumatic and hydraulic pressure standards and other physical and electronic tests. Diagnoses equipment, makes repairs, and replaces defective parts/components such as integrated circuits, printed circuit boards, electronic condition coils, radiation detector boards/circuits, crystals, transistors, tubes, transformers, condensers, diodes, relays potentiometers, and related components. Following repair, tests by applying signals in known amplitude and wave shape into oscilloscopes to observe wave pattern. Isolates faults by taking measurements and comparisons in voltage, amperage, ohms, henries, power factor, watts, temperature, humidity, microns, foot-pounds, decibels, sensitivity, noise, stability, Voltage Standard Wave Ratio (VSWR), impedance, phase, absolute pressure, time intervals, displacement, flow rate, etc., to determine performance of equipment. If signal is distorted, traces it through electronic stages to locate malfunctioning part. Checks sweep rate by feeding known signal to an oscilloscope and observing wave pattern to correct shape and size. As needed, contacts the using organization to obtain information concerning the nature of the malfunction. Uses equipment schematics to analyze circuits by preparing block diagram showing major components such as amplifiers, filters, oscillators and indicators.

Requirements

This is an excepted service position that requires membership in the Illinois National Guard and in the military grade listed in the announcement. This is required prior to the effective date of placement. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position. Selectee will be required to wear a military uniform. Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment. Males born after 31 December 1959 must be registered for Selective Service. Federal employment suitability as determined by a background investigation. May be required to successfully complete a trial period. This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position. IAW The Fair Chance Act, Agency employees may not request criminal history information at the point of initial application, upon receipt of an application, or prior to, during or after a job interview. If an Optional Form (OF) 306, Declaration of Employment is submitted prior to the point of a conditional offer, questions related to background information section may not be asked. Irregular and/or overtime (compensatory) hours may be required to support operational requirements or contingencies or may be required to work hours outside of the normal duty day. Participation in direct deposit is mandatory.

Qualifications and evaluation

Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration. Your qualifications will be evaluated on the following competencies (knowledge, skills, abilities and other characteristics): ELECTRONIC MEASUREMENT EQUIPMENT MECHANIC (TITLE 32)

Education

Some federal jobs allow you to substitute your education for the required experience to qualify. For this job, you must meet the qualification requirement using experience alone. No substitution of education for experience is permitted for this occupational series and grade.

How to apply

To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below. To view the Occupational Questionnaire, click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/13052751 A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration. To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application. Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process. After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process. You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application. To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.

Required documents

To apply for this position, you must submit a complete Application Package which includes: REQUIRED DOCUMENTS: Your resume clearly demonstrates experience that meets the requirements of this position. Your resume must contain identifiable information such as your name, address, and phone number. It should also show your work schedule, hours worked per week, dates (including Month and Year, e.g., 02/2017, Feb 2017, etc.) of employment and duties performed. Resume must not exceed 2 pages. SF-50 - Must include if you are a current or previous federal employee. Other supporting documents (as applicable): Certifications DD-214 SF-50 - Please include if you are a current or previous federal employee. OFFICIAL Transcript NGIL Form 73 https://www.il.ngb.army.mil/Portals/30/Documents/Jobs/NGILForm73.pdf?ver=2019-05-01-161908-260 *NGIL Form 73 - Illinois National Guard Technician Program Supplement to Application for Dual Status (DS), to reflect military qualifications. Complete and accurate data is essential to ensure fair evaluation, applicants with no military qualifications must submit form stating, "not applicable" and signature on page 2 of the NGIL Form 73. Documents NOT accepted: photographs, copies of position descriptions, training certificates, performance ratings, awards, and letters of appreciation.

Additional information

If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (Register | Selective Service System : Selective Service System (sss.gov)). If you are needing some extra information regarding Federal Resumes, you should consider these tips from USA Jobs: USAJOBS Help Center | What should I include in my federal resume?