ELECTRONICS TECHNICIAN (RADAR)

Summary

THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION. This National Guard position is for a ELECTRONICS TECHNICIAN (RADAR), Position Description Number D1684P01 and is part of the ID 266 RANS, National Guard. This position is Indefinite with Possibility to Non-Competitively Convert at Later Date

Duties

(1) Deploys, installs, integrates, operates, optimizes, recovers, maintains, and repairs radar systems, sub-systems and components. Ensures that complex air control radar systems are operating at specified technical order (TO) standards and mission requirements. Independently validates operational readiness of complex radar systems for accurate height, range, and azimuth. Validation determines if corrective actions are needed to return the equipment to established tolerances. (2) Integrates and maintains various subsystems such as transmitters, receivers, Digital Target Extractors (DTE), Theatre Missile Defense processors (TMD), Identification Friend or Foe (IFF), Situation Display Console (SDC), Electronic Counter Measures (ECM) and Electronic Counter Counter Measures (ECCM). Radar systems, sub-systems, and components range from older analog microwave technology up to computerized digital technology. (3) Utilizes an extensive variety of Test, Measuring, and Diagnostic Equipment (TMDE) to analyze, evaluate, test, calibrate, modify, diagnose, and perform corrective repair to assure the integrity of assigned equipment. Interprets highly complex electronics diagrams and schematics for determining the cause and leading to the repair of equipment malfunctions. (4) Performs site surveys and uses sophisticated engineering analysis tools (e.g. Falcon Look, and Radar Coverage Predictor) to generate placement and configuration documentation depicting radar coverage and radiation patterns. Notifies appropriate agencies of possible Radio Frequency (RF) radiation, interference or other hazards. Develops, formats, and reviews both internal and external after-action report documentation. Provides direct customer support which includes field testing and recommending new equipment, site surveys, training, resolving problems related to configuration management, systems functionality, hardware and software configuration, and system conflict resolution. (5) Coordinates frequency requests with installation spectrum manager or other agencies to de-conflict frequency assignments when required. (6) Performs equipment modification and changes as directed by Time Compliance Technical Orders (TCTO). Works with Quality Assurance, Job Control, and Supply to insure the appropriate TCTO kit is on hand, schedule and perform the modification, and complete a special inspection at the completion of the modification. Designs, requests approval for, and performs temporary modifications to solve unique one-of-a-kind technical issues with the equipment and configurations. Supports and assists depot and other mobile maintenance teams on extensive equipment modifications. May be tasked to travel with and provide expertise to major command sponsored site support teams. (7) Tracks and accounts for equipment status and location and coordinates equipment status changes through Maintenance Operations Control. Performs system trend analysis. Performs Maintenance Data Collection (MDC) and participates in Maintenance Standardization Evaluation Program (MSEP) processes. (8) Develops, establishes, and maintains work center training programs. Plans and schedules tasks and training activities for drill status guard members. Oversees and conducts on-the-job training (OJT) for personnel. Creates and develops lesson plans. Ensures availability of facilities and training aids. Monitors the training status of personnel and ensures that supplemental and/or remedial training is accomplished. (9) Ensures mobilization readiness of section personnel and equipment. Fabricates cables and connectors to interface with various commercial and military electronic systems and sub-systems. Completes proper documentation and follows procedures for incident reporting. Completes maintenance data collection and performs administrative duties for TO and work center files. Manages bench stock, logistics products, historical records, training records, Test, Measurement, and Diagnostic Equipment (TMDE) records, hazardous waste, and safety procedures. (10) Acts as Communications Security (COMSEC) responsible officer for work center. (11) Performs other duties as assigned.

Qualifications and evaluation

Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.

Education

There are no additional educational requirements for this position.

How to apply

To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below. To view the Occupational Questionnaire, click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/12985840 A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration. To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application. Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process. After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process. You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application. To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.

Required documents

To apply for this position, you must submit a complete Application Package which includes: 1. Your resume showing: Contact Information-your name and the best way to contact you. Relevant work experience-include the employer's name, job title, start and end dates (month/year), the number of hours worked per week and describe how you meet the required qualifications of the job. Federal jobs should include series and grade. Education, certifications or licensures. 2. Other supporting documents: SF-50, DD214 or documentation showing compatible military MOS, vMPF RIP (Air Force Applicants)

Additional information

If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (Register | Selective Service System : Selective Service System (sss.gov)). Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Candidates will not be hired based on their race, sex, color, religion, or national origin. MORE THAN ONE SELECTION MAY BE MADE FROM THIS ANNOUNCEMENT IF ADDITIONAL IDENTICAL VACANCIES IN THE SAME TITLE, SERIES, GRADE AND UNIT OCCUR. THE EFFECTIVE/START DATE FOR THIS POSITION WILL BE IAW THE SECRETARY OF DEFENSE GUIDANCE ON THE TITLE 32 DUAL STATUS MILITARY TECHNICIAN HIRING FREEZE EXEMPTION DATED 29 MARCH 2025.