ELECTRONICS TECHNICIAN

Summary

You will serve as a ELECTRONICS TECHNICIAN in the ENGINEERING DEPARTMENT (CODE 200) in the of SOUTHEAST REG MAINTENANCE CTR SERMC.

Duties

You will serve as primary liaison providing technical guidance and coordination of organized teams with responsibility for functional checkout, test and inspection of major systems, as well as prioritizing work, and resolving conflicts. You will prepare comprehensive technical reports, and when required, formal correspondence, identifying the root cause and all other significant aspects of the problem and the corrections applied. You will have principal responsibility for determining state of operability and contractors’ compliance with installation objectives for the systems assigned. You may be tasked to represent INSURV in the inspection and functional checkout/demonstration of major shipboard systems onboard Mayport based ships as a full participant in INSURV material inspections. You will provide authoritative technical/engineering guidance to Regional Maintenance Centers (RMC) and Naval Shipyards in resolution of repair/overhaul or test/grooming problems beyond their level of in-house engineering expertise. You will assist in performing special analyses and studies either in support of SYSCOM/ISEA or in-house initiatives for the purpose of assisting with developing or evaluating improvements in designs, maintenance procedures, material, etc. You will install Ordnance Alterations, Ship Alterations, Machinery Alterations, and Field Changes. You will perform functional checkout, grooming, adjustment and tests of new or modernized shipboard systems in an operational evaluation in which the individual has primary responsibility for operations of a system or major subsystems.

Qualifications and evaluation

In order to qualify for this position, your resume must provide sufficient experience and/or education, knowledge, skills, and abilities to perform the duties of the specific position for which you are being considered. Your resume is the key means we have for evaluating your skills, knowledge, and abilities as they relate to this position. Therefore, we encourage you to be clear and specific when describing your experience. When the application process is complete, we will review your resume to ensure you meet the hiring eligibility and qualification requirements listed in this announcement. You will be rated based on the information provided in your resume and application package, along with your supporting documentation to determine your ability to demonstrate the following competencies: Attention to Detail Customer Service Flexibility Integrity/Honesty Interpersonal Skills Learning Reading Comprehension Reasoning Self-Management Stress Tolerance This recruitment will utilize the following technical assessment tools: Structured Resume Review and Structured Interview. You should list any relevant performance appraisals and incentive awards in your resume as that information may be taken into consideration during the selection process. If selected, you may be required to provide supporting documentation. If after reviewing your resume and supporting documentation, a determination is made that you inflated your qualifications and/or experience, your score may be adjusted to more accurately reflect your abilities or you may be found ineligible/not qualified. Please follow all instructions carefully. Errors or omissions may affect your rating or consideration for employment. All qualifications requirements must be met by the closing date of this announcement.

Education

Applicants must meet the following Basic Requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: Applicants must possess: knowledge of the techniques and theories characteristic of electronics, such as a knowledge of basic electricity and electronic theory, algebra, and elementary physics; knowledge of electronic equipment design, development, evaluation, testing, installation, and maintenance; and knowledge of the capabilities, limitations, operations, design, characteristics, and functional use of a variety of types and models of electronic equipment and systems related to, but less than, a full professional knowledge of electronic engineering. Electronics technicians may have gained experience assisting in work situations including: Maintenance - Developing maintenance standards and procedures for use by others. Analyzing repair practices and developing procedural instructions for use by others on methods and steps to repair equipment. Installation - Planning and directing the installation of complex systems and associated facilities, particularly where there are site selection and construction problems, dealings with contractors and public utilities, and the possible need to modify equipment for novel site characteristics. Fabrication - Designing and analyzing circuits, determining design feasibility, evaluating equipment performance under varying environmental conditions, and collecting performance data. Designing or modifying designs to achieve performance and cost objectives. Evaluating the adequacy of equipment for such purposes as repair, calibration, and testing. Testing and Evaluation/Research and Development - Developing or evaluating new or modified electronic systems. Completing testing, evaluating data, and determining acceptability of equipment modifications, validity, test procedures and data, or legality of operation. Technicians support professional engineers in performing experiments, research, and developmental activities requiring an in-depth knowledge of technical engineering methods, applications, practices, and principles to work on concepts, prototypes, and experimental projects that are without precedent and support state-of-the-art research. Sustainment - Developing, performing, evaluating, or modifying calibration and test equipment, systems, and procedures. Reporting, analyzing, and archiving test data. Performing complex calculations and manipulations of test data to improve performance of systems, instrumentation, measurement standards, techniques, and procedures. Troubleshooting - Analyzing and diagnosing faults in the operational configuration of electronic systems and equipment. Interpreting circuit wiring, logic cable diagrams, drawings, specifications, and schematics of complete systems and equipment to understand the function and interconnections of the various assemblies and troubleshoot the system.

How to apply

Click the Apply Online button to create an account or log in to your existing USAJOBS account. To apply for this position, you must provide a complete Application Package which includes: 1. Complete resume with relevant experience, job title, duties and accomplishments. Resumes are restricted to no more than 2 pages. Illegible/unreadable resumes will not be considered. Your resume must show complete information for each job entry to support minimum qualifications. The following information should be provided in your resume: employer's name, starting and end dates (Mo/Yr), hours per week if experience was less than full time (35-40 hours per week), pay plan, series and grade level (e.g. GS-0201-09) for relevant federal experience. TIP: A good way to ensure you include all essential information is to use the Resume Builder in USAJOBS to create your resume. 2. Supporting documentation Failure to submit a complete application package will result in an ineligible rating and loss of consideration. Your complete application must be received by 11:59 pm Eastern Standard Time (EST) on 10/09/2026. Applications received after 10/09/2026 will generally result in an ineligible rating and loss of consideration. If more than one resume is received, only the last resume received and processed will be reviewed. For additional information on viewing your application status, click https://help.usajobs.gov/how-to/application/status. You are encouraged to apply online. Applying online will allow you to review and track the status of your application. Do not email or send hard copy resumes/applications to the Contact Information or Agency Information listed in this vacancy announcement. All resumes/applications received at the addresses listed in the Contact Information or Agency Information will be destroyed and will not be considered for this vacancy announcement. It is the applicant's responsibility to verify that all information in their resume and documents are legible and accurate. HR will not modify answers/documents submitted by an applicant.

Required documents

You are required to provide documentation that supports the eligibility and qualification claims made in your resume. You must submit the applicable documents listed here and those listed with the eligibilities you select in the announcement questionnaire with your application package. Applicants who do not provide supporting documentation that fully support their claims will not be referred to the hiring manager. Cover letter is optional. A complete resume is required. Resumes are restricted to no more than 2 pages. Illegible/unreadable resumes will not be considered. Your resume must show relevant experience, job title, duties and accomplishments. Your resume must show complete information for each job entry to support minimum qualifications. The following information should be provided in your resume: employer's name, starting and end dates (Mo/Yr), hours per week if experience was less than full time (35-40 hours per week), pay plan, series and grade level (e.g. GS-0201-09) for relevant federal experience. TIP: A good way to ensure you include all essential information is to use the Resume Builder in USAJOBS to create your resume. Are you applying for a promotion? For GS positions, to be considered for a promotion, you must provide SF-50(s) that shows you held the next lower GS grade for at least one year. SF-50s that have an effective date within the past year (e.g., General Adjustment SF-50 from this year or Within Rate/Grade Increases (WRI/WGI) SF-50 within a year) do not clearly show that you meet the one-year time-in-grade requirement. That means if you submit an SF-50 dated within the last year, you must submit another SF-50 dated more than one year ago to clearly demonstrate you meet the time-in-grade requirements. If you are a DoD employee, you can obtain a copy of your SF- 50(s) from MyBiz. Are you claiming membership in any professional organizations, or possession of a license, certificate or credentials? Check the Conditions of Employment section above to see if any are required. If you claim membership, license, certification, or credentials, you must submit a copy of said document in your application package. Are you using education as a substitute for some or all of the experience requirement? Is there a basic education requirement for this position? Check the Education section above to see what is allowed and what is required. Any claims you make in your resume regarding education or degrees MUST be supported by submitting with your application official or unofficial transcripts or a list of courses, grades earned, completion dates, and quarter and semester hours earned issued from your school. While unofficial transcripts are acceptable for initial application, an official transcript will ultimately be required if you are selected for the position. You may submit a copy your degree(s) if specific coursework does not have to be verified. Are you a veteran claiming 5-point veterans' preference or claiming sole survivorship preference? You must submit a copy of your latest DD-214 Certificate of Release or Discharge from Active Duty (any copy that shows all dates of service, as well as character of service [Honorable, General, etc.] is acceptable) OR a VA letter that shows dates of service or service connected disability AND character of service. If you have more than one DD-214 for multiple periods of active duty service, submit a copy for each period of service. If you were issued a DD-215 to amend aforementioned information on the DD-214 you must submit that too. If you are not sure of your preference eligibility, visit the Department of Labor's website: Veterans' Preference Advisor Are you a disabled veteran or claiming 10-point veterans' preference? If you are eligible to claim 10 point veterans preference you must submit a DD-214 Certificate of Release or Discharge from Active Duty as described above for 5-point preference. You must also provide the applicable supporting documentation of your disability (e.g. disability letter from the VA) as described on Standard Form-15 (SF-15). http://www.opm.gov/forms/pdf_fill/SF15.pdf. Are you an active duty service member? Active Duty Service Members are required to submit a statement of service printed on command letterhead and signed by the command. The statement of service must provide the branch of service, rate/rank, all dates of service, the expected date of discharge and anticipated character of service (Honorable, General, etc.). Application documents, including supplemental ones, may be shared outside the Human Resources Office. Supplemental documents may contain your SSN, DOB, or personal information of others (e.g., on military orders, marriage certificates). You may redact this information before submitting; however, if selected, you must provide unredacted originals.

Additional information

This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. During the application process you will have the ability to opt-in to make your resume available to hiring managers in the agency who have similar positions in the local commuting area. Depending on the hiring organization and the position being filled, job requirements (e.g., security clearance, travel, drug testing, financial disclosure filing, bargaining unit status, etc.) may vary. Other hiring managers filling similar positions may offer relocation expense reimbursement and/or may offer recruitment incentives for new employees, depending on funding availability and in accordance with policy. If you opt-in and are referred on a certificate, your resume will be available to other hiring managers for 180-days from the date the job announcement closes. Opting in does not impact your application for this announcement, nor does it guarantee further consideration for additional positions. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf ICTAP Applicants: To be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating in the highly qualified category (score 85) or higher. ICTAP candidates must provide copies of all of the following documentation at the time of application: 1) agency notice; 2) most recent performance appraisal; and 3) most recent SF-50 or notification of personnel action that includes position, grade level, and duty location. Applicants who do not provide this documentation will not receive consideration as an ICTAP candidate. For more information about ICTAP eligibility please review the following link: https://www.usajobs.gov/Help/working-in-government/unique-hiring-paths/federal-employees/career-transition/ Military Spouse Preference applicants will be placed at the highest grade for which they have applied and are determined Best Qualified (BQ). A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position. PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized. Helicopters and aircraft (COD) flights are utilized for transfer to/from ships at sea. High line transfer from ship to ship may be occasionally required. There are also requirements to conduct surface vessel/submarine at-sea trials and evaluations.