ELECTRONIC INTEGRATED SYSTEMS MECHANIC (Title 32)

Summary

THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION. This National Guard position is for a ELECTRONIC INTEGRATED SYSTEMS MECHANIC (Title 32), Position Description Number D2240P01 and is part of the AR ANG 189 MAI SQ, National Guard. NATIONAL GUARD MEMBERSHIP IS REQURED- If you are not currently a member of any military service (Branch/Status), please provide a letter stating intent to join.

Duties

1. Performs scheduled and unscheduled maintenance on one or more multi-complex electronic integrated systems. Completes operational checks, inspections, tests, trouble shooting, removal and replacement of Line Replaceable Units (LRUs) which are linked with integrated systems and LRUs which are independent or associated with nonintegrated systems. Isolates unusual malfunctions using technical orders, schematics, wiring diagrams, tools, and test equipment including automatic test equipment and Flight Line Test Systems (FLTS). Solves complex problems by analyzing installation, circuitry, and operating characteristics of the systems. Adjusts and aligns system sensors, transmitters, amplifiers, power supplies, display devices, controls, transponders, actuators, servos, computers and other related components. Installs serviceable components into aircraft and performs total systems alignment and harmonization in accordance with existing technical orders and directives. Accomplishes technical order compliances, modification of components/systems and completes thorough system checks for proper operation. Maintains, modifies, calibrates and inspects a wide variety of user test, measurement, and diagnostic equipment (TMDE). Installs, modifies, overhauls, maintains, troubleshoots, repairs, rebuilds, aligns, and calibrates complete electronic avionics multi-systems control. Demonstrates a thorough working knowledge of complex aircraft avionics and or ECM systems such as the electronics package in a highly automated aircraft where the integrated flight and Integrated Countermeasures System, electronic multiplex communications bus, Inertial Navigation System, multi-function displays, head-up display, data transfer equipment, Global Positioning System, Situation Awareness Data-Link (SADL), Data Modem, Flight Control System, pitot-static system and related instrumentation, flight director instrumentation, Central Air Data Computer, engine, hydraulic and fuel quantity indicating systems, voice message warning, VHF, UHF, SATCOM Data, intercom, secure voice communications, Identification Friend or Foe (IFF), and Tactical Air Navigation System (TACAN). Evaluates operational characteristics of the integrated systems by observing and analyzing waveforms, voltage, current, power indications, computer registers and printouts. Analyzes the malfunctions encountered through fault codes, determines repair sequence process and performs the repairs. 2. Reviews and analyzes maintenance data; determines if criteria are sufficient to provide adequate test, troubleshooting and repair procedures; devises and recommends tests, procedural changes, or data corrections. Aligns, adjusts, and performs final calibrations on integrated systems to determine successful repairs. Analyzes equipment failure and malfunctions and suggests changes to improve operation. Monitors the operation of complex, interrelated systems, analyzes operating trends, proposes preventative maintenance down time to assure continued operating capability, and recommends components for overhaul or engineering evaluation for disposal. Applies technical data and equipment specifications to determine the impact that equipment modifications or substitutions will have upon integrated multi-system operations and various maintenance alignment procedures. Uses algebraic and trigonometric functions to adapt standard formulas to the specific requirements of the integrated system. Installs, operates, and repairs prototype or experimental electronic systems such as inertial navigation, automatic flight control as assigned. Advises Aerospace Engineering personnel on the operation and maintenance effects of proposed Time Compliance Technical Orders (TCTO) modifications on new or existing equipment. Interacts directly with aircrews for mission/sortie debrief and enhanced system troubleshooting. DUTIES CONTINUED UNDER THE EDUCATION SECTION.

Requirements

NATIONAL GUARD MEMBERSHIP IS REQUIRED. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position. Compatible military grade and assignment required prior to the effective date of placement. This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard. Applicants who are not currently a member of the National Guard must be eligible for immediate membership in the military grade listed below. Selectee will be required to wear the military uniform. Military Grades: Enlisted Minimum Military Grade: E-3/A1C Maximum Military Grade: E-5/SSgt Compatible Military Assignments: Selectee must be a member of the Arkansas Air National Guard. IMPORTANT NOTES (AS APPLICABLE): Upon selection for this position, individual must possess or initiate a National Agency Check with Inquiries (NACI) background investigation. A favorable determination based upon investigative results is mandatory for this position. Failure to meet these requirements will result in termination of employment. A pre-placement physical is required if not already current. Upon selection, must complete mandatory Full-Time Support (FTS) Training at the Professional Education Center (PEC) within six months of assignment (if applicable, training will be coordinated by the supervisor). Individual must meet all military requirements of the position without creating a grade inversion, as determined by the Human Resources Office (HRO). Technicians will not be militarily senior to their full-time supervisor or wage leader (Grade Inversion). Enlisted members currently at a higher grade than allowed by the position (see Military Grade Requirement above) may apply; however, they must administratively reduce prior to appointment and provide confirmation of the reduction to HRO. ADDITIONAL REQUIREMENTS ARE LISTED UNDER ADDITIONAL INFORMATION.

Qualifications and evaluation

Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration. Your qualifications will be evaluated on the above general and specialized experience, to include following competencies- knowledge, skills, abilities (KSAs): Knowledge of electronic theories and practices of integrated electronic, pneumatic, hydraulic, optical, and mechanical systems of such applications as digital or analog computers, digital display devices which enables the incumbent to understand and predict the effects of subsystem malfunctions on the total function system. Ability to apply electronic theories and practices to identify, isolate and repair malfunctions in one or more complex integrated systems where knowledge of the entire system is necessary to interpret error data and trace problems back through a number of units of the system to locate deficiencies. Thorough knowledge of the principles of digital and analog circuits, solid state devices theory, electromechanical devices, digital techniques, synchro/servo operation and integrated circuit theory. Ability to interpret/trace schematics, logic/wiring diagrams and use a wide variety of test, measurement, and diagnostic equipment (TMDE). Ability to perform algebraic and trigonometric formulas. Knowledge of the technology and practices which integrate the components of the systems into a total functional system. Determine methods of repair where extremely complex relationships exist among numerous inter-connected units and control circuits; not only within the individual control systems but between them as well. Knowledge and ability to perform complex mathematics including algebra and trigonometric formulas to calculate power relationships, signal phasing, etc., and to solve work related problems. Ability to accurately identify, isolate, repair, align, and adjust complete multi-system complex malfunctions of the aircraft where target acquisition and tracking, weapons control, aircraft attitude control, navigation and other complex functions are performed by numerous systems which are extensively interconnected with data feedback loops. Ability to follow drawings for multi-system complexes of numerous integrated systems; to trace the effect of a change in one subsystem to other integrated subsystems and determine which controls and devices must be changed or adjusted to compensate; and to repair, align, and adjust complete multi-systems such as the electronics package in a highly automated aircraft where target acquisition and tracking, weapons control, aircraft attitude control, navigation, and other complex functions are performed by numerous systems that are extensively interconnected with data feedback loops. Ability to isolate malfunctions of complete multiple integrated system complexes consisting of closely interrelated integrated and non-integrated systems. KSAs CONTINUED UNDER THE BENEFITS SECTION.

Education

DUTIES CONTINUED. 3. Troubleshoots operational malfunctions and analyzes system performance utilizing aircrew debrief data, Technical Orders, schematic and wiring diagrams, engineering drawings, data analysis, common and system-specific test equipment and built in system tests. Performs on and off-equipment maintenance on systems such as automatic flight control, instruments, communication, navigation, and inertial navigation. Coordinates back shop bench check (if applicable, completes testing, repair, inspection, modification, programming, reprogramming, mating, adjusting, alignment, and analyzing of LRUs and shop replaceable units (SRUs). Uses a variety of test equipment such as automatic test equipment (ATE), oscilloscopes, frequency counters, phase-angle voltmeters, optical alignment equipment, digital pitot-static testers, programming units and special purpose test analyzers. Tests and troubleshoots solid state electronic assemblies and subassemblies such as circuit cards, modules, rate generators, electronic control amplifiers, electro-mechanical assemblies, random access memories, programmable read only memories, and various integrated circuits. Identifies faulty parts and repairs to level authorized. Reassembles unit after repair, performs alignment and makes shop checks. 4. Recommends methods to improve equipment performance, technical data, and maintenance procedures by reporting hardware and software malfunctions, initiates material deficiency reports both on equipment and in technical data, and assists in design changes as necessary. Conducts aircrew debriefing to determine the nature of system malfunctions. Documents all discrepancies and maintenance actions performed by inputting information into the electronic records information systems (i.e.: CAMS, IMDS, GO-81, REMIS). Recommends hardware and software changes. Submits change recommendations to Technical Orders. Requisitions supply assets and processes repairable assets in accordance with Standard Base Supply System requirements. Documents maintenance actions in aircraft forms and documents man-hour expenditures and maintenance actions in the maintenance computer system. Maintains Electronic Warfare (EW) (if applicable) and analysis equipment such as infrared/radar warning equipment, infrared/radar jamming equipment, chaff/flare dispensing systems, signal analysis equipment, recorders, direction finders, and special purpose test equipment. Accomplishes organizational and intermediate level modifications. Configures complex aircraft ECM equipment (if applicable) to meet critical mission requirements. Performs intricate component alignment and calibration to ensure proper system operation. Performs flight operational test, adjusts or replaces units or components as required. Conducts aircrew debriefings to analyze maintenance problems and determines the nature of required modifications. 5. May upload and download chaff/flare dispensers. This hazardous task may involve the inspection, storage and handling of explosive devices; to include flares, chaff, impulse cartridges and similar items. Conducts on-the-job training on assigned systems and related support equipment and tasks to include classroom instruction as necessary. Provides training to lower graded personnel concerned with the repair of integrated avionics systems. Provides training to newly assigned personnel regardless of grade level. Prepares for and participates in Aerospace Expeditionary Force (AEF) tasking, deployments and various inspections and exercises. Processes and accounts for due-in from maintenance (DIFM) supply assets. Ensures that material and equipment are properly stored, protected and maintained and that funds are not obligated for material or parts without proper justification. 6. May be required to perform additional duties such as structural fire-fighting, aircraft fire/crash/rescue duty, serve as a security guard, remove snow, load and handle munitions, launch/recover and service aircraft, operate heavy equipment, maintain facilities and equipment, or serve as a member of a team to cope with natural disasters or civil emergencies. Complies with safety, fire, security, and housekeeping regulations. 7. Performs other duties as assigned.

Benefits

KNOWLEDGE, SKILLS, AND ABILIES CONTINUED. Skill in the set up and operation of computer controlled test equipment such as Portable Automated Test Station (PATS), Joint Service Electronic Combat System Tester (JSECST),test stands, oscilloscopes (dual trace, storage, digitized), spectrum, network and distortion analyzers, frequency counters, and signal generators; in interpreting complex drawings, specifications, and schematics of complete multi-system complexes such as the complete electronics package for an aircraft including numerous interconnections of signal paths both between and within individual subsystems of the multi-system complex; and in troubleshooting, installing, repairing, and maintaining electronic integrated multi-systems where circuit theory must be used to understand the operation of a large number of circuits and functions, and the interaction of subsystems which create malfunctions. Working knowledge of the Technical Order system and other technical publications and directives relating to the section. Current certification in high reliability soldering techniques, as well as electrostatic discharge protective techniques.

How to apply

To apply for this position, you must complete the online application and submit the documentation specified in the Required Documents section below. A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration. To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application. Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process. After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process. You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application. To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.

Required documents

To apply for this position, you must submit a complete Application Package which includes: 1. Resume: showing work schedule, hours worked per week, dates (including Month and Year, e.g., 02/2017, Feb 2017, etc.) of employment and duties performed. DO NOT COPY THE GENERAL, SPECIALIZED EXPERIENCE, KSAs AND DUTIES WORD FOR WORD AND PLACE INTO YOUR RESUME; YOU MUST DESCRIBE YOUR PERSONAL EXPERIENCE AS IT PERTAINS TO EACH STATEMENT. 2. Current Military Branch Career Data Brief: Air- Career Data Brief: can be obtained through vMPF using the following steps: Navigate to https://vmpf.us.af.mil/vMPFNet40/Hub.aspx > Login > Career Data Brief (CDB) > View CDB > Print to Microsoft PDF > Save as a PDF. Army- Soldier Talent Profile: can be obtained through IPPS-A using the following steps: Navigate to https://ipps-a.army.mil Login > PKI Login > (login with CAC) > OK > My Soldier Talent Profile > Print. From here, you save the document as a PDF. If you are not currently serving in a Military compacity (any Branch or Service), please provide a letter of intent to join the National Guard. Failure to provide proper documents may result in disqualification.

Additional information

If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (Register | Selective Service System : Selective Service System (sss.gov)). REQUIREMENTS/CONDITIONS OF EMPLOYMENT: Males born after 31 December 1959 must be registered for Selective Service. Federal employment suitability as determined by a background investigation. May be required to successfully complete a probationary period. Participation in direct deposit is mandatory. Must be able to obtain/maintain appropriate security clearance This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position. Ability to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission. The duties and responsibilities of your job may significantly impact the environment. You are responsible to maintain awareness of your environmental responsibilities as dictated by legal and regulatory requirements, your organization, and its changing mission. Must have AFSC 2A9X4