PRODUCTION CONTROLLER (AIRCRAFT)

Summary

IOWA ARMY NATIONAL GUARD - TITLE 32 EXCEPTED SERVICE POSITION This position is restricted to current Military members of the Iowa Army National Guard. LOCATION: AASF 1, Boone, IA

Duties

As a PRODUCTION CONTROLLER (AIRCRAFT), GS-1152-9 your duties are below. Analyzes allocated Flying Hour Program (FHP). Develops plans to optimize execution of flying hours with available resources to satisfy operational and training requirements of the AASF and supported units. Considers Additional Flight Training Periods (AFTP), Multiple and Unit Training Assemblies, Annual Training periods, Mobilization Planning and Training Exercises, and State Emergency Operations in the distribution of aircraft and aircraft hours. Analyzes supported Aviation units' logistics capabilities and training requirements. Develops plans to improve technical proficiency of unit personnel and includes them in the AASF logistics efforts. Develops maintenance plans to maximize AASF services to maintain aircraft readiness. Projects short and long term maintenance requirements. Identifies full-time support and unit personnel capacities and capabilities, annual training schedules, tool and diagnostic test equipment requirements, repair parts, and facilities needed to satisfy operational and training flight requirements. Develops schedules of aircraft and hours to be flown to satisfy the AASF operational aircraft requirements. Recommends priorities for use of aircraft based on operational mission requirements and projected short and long-term maintenance requirements and AASF capabilities. Develops integrated workload schedules and priorities to balance operational and training flying requirements and logistics capabilities. Programs scheduled and unscheduled maintenance requirements, manpower capabilities and capacities, facilities, repair parts, AASF and Unit operations to meet short and long-term maintenance workloads. Maintains a regular flow of work through the shops Uses Unit Level Logistics System-Aviation (ULLS-A) (ACN) to facilitate management of AASF logistics operations. Monitors work order status and repair parts requisitions. Compiles data and analyzes information used in aircraft and logistical reports. Processes both formatted and ad hoc ULLS-A (ACN) reports for supervisor and/or supported units. Serves as contact point between the Logistics Manager/Supervisory Maintenance Test Pilot and work centers. Provides analytical information for continuous management reviews of aircraft readiness and workload capabilities and capacities. Establishes procedures to identify repeat aircraft discrepancies and trends. Monitors trends and provides planning factors for aircraft availability and maintenance schedule progress. Maintains maintenance priorities by equipment type and unit supported. Reports deviations from plans and consequences of deviations on work schedules. Assists in the resolution of problems encountered between scheduled or unscheduled production requirements. Makes recommendations for adjustments to repair priorities necessitated by changes in operational conditions or unscheduled maintenance-supply requirements. Coordinates Maintenance Test Flights (MTF) and Maintenance Operational Checks (MOC) to ensure optimum availability of ready aircraft. Coordinates and publishes maintenance plans and schedules. Maintains displays of aircraft status, flight requirements, and in-process workload. Prepares forecasts of scheduled and depot maintenance requirements. Prioritizes unscheduled maintenance requirements based on AASF work capabilities and capacities. Maintains maintenance flow charts. Monitors component time change and controlled exchange program. Collects data, processes, and submits Aircraft Inventory Status and Flying Time Report (DA Form 1352) as well as data and information pertaining to Unit Status Reports (USR). Insures information is accurate, complete, and forwarded. Maintains historical documentation and current AASF logistics capabilities and capacities. Compiles data on work processes for quality and quality improvements. Documents AASF productions cost and job standards. Interfaces with AASF Logistics, Flight Operations and Training, United States Property and Fiscal Office (USP&FO) and supported units for accomplishing priorities and deadlines established by higher authorities or supported units. Interacts with logistical personnel at the USP&FO concerning critical supply and fiscal programs. Coordinates with support units and other support maintenance activities concerning the delivery, status of repair operations, and/or pick-up of completed work orders. Serves as a point of contact (POC) with NGB, AMCOM, AVCRAD, state, and supported units on matters of AASF logistical services. Attends conferences, briefings, and meetings to represent AASF logistical support and services. Performs other duties as assigned. D1064

Requirements

NATIONAL GUARD MEMBERSHIP IS REQUIRED: This is an excepted position that requires military membership in a compatible military assignment in the Iowa Army National Guard. Selectee will be required to wear the military uniform. Acceptance of this excepted position constitutes concurrence with these requirements as a condition of employment. APPLICATION MATERIALS MUST BE RECEIVED BY 11/27/2026 . FAILURE TO PROVIDE COMPLETE INFORMATION MAY RESULT IN YOUR NOT RECEIVING CONSIDERATION FOR THIS POSITION. Please refer to the Qualifications and Evaluations Section of this Announcement to understand the qualification requirements, and the How to Apply Section for detailed instruction on applying. TRIAL PERIOD REQUIREMENT: As a condition of employment for accepting this position, you will be required to serve a 2-year trial period or 1-year (Veterans Preference Eligibles Only) during which we will evaluate your fitness and whether your continued employment advances the public interest. In determining if your employment advances the public interest, we may consider: Your performance and conduct. The needs and interests of the agency. Whether your continued employment would advance organizational goals of the agency or the Government; and Whether your continued employment would advance the efficiency of the Federal service. Upon completion of your trial period your employment will be terminated unless you receive certification, in writing, that your continued employment advances the public interest. SECURITY CLEARANCE REQUIREMENT: Employment is subject to attaining and maintaining a clearance as required by this position. If the selectee does not possess the applicable security clearance when hired, application must be made within 30 days of the start date. Failure to make application for the required security clearance will result in termination of employment. Failure to complete prescribed courses may be cause for reassignment or termination of FTS. Military Rank Requirements: OFFICERS, WARRANT OFFICERS, and ENLISTED MEMBERS (E-5 to O-3)

Qualifications and evaluation

Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are found to be among the qualified candidates, you will be referred to the selecting official for employment consideration. Verbiage displayed on your resume or application must contain your own words. You may refer to position descriptions, i.e. the general and specialized experience located within the vacancy announcement, to assist with describing work experiences; however, resumes or applications received in verbatim will not be considered. In your resume you will need to address the general and specialized experience listed above. Please use as much detail as needed, giving dates (months and years) of the experience, position title and how the experience was gained. This information is needed to determine if you are qualified for the position. Knowledge, Skills and Abilities required for this position: Extensive knowledge of production methods, procedures and operations sufficient to collect, compile, correlate, maintain, and integrate production efforts for logistical support of single and multi-engine rotary wing aircraft. Extensive knowledge of organization and functions of ARNG Units supported by AASF to integrate MTOE and personnel into AASF production services and facilitate training and readiness of supported Units. Extensive knowledge of policies, regulations, and processes governing production operations to carry out established production assignments. Knowledge of assigned aircraft and equipment to correlate and analyze a variety of routine production schedules and effectively communicate with contacts. Knowledge to analyze and correct a variety of production data and processes, to prepare production schedules, prepare reporting data, etc. Knowledge of the ULLS-A (ACN) to input data, provide status of equipment, monitor work priorities, requisition repair parts, etc.

Education

Substitution of Education for Specialized Experience - master's or equivalent graduate degree or 2 full years of progressively higher level graduate education leading to such a degree or LL.B. or J.D., if related To receive credit for education, you must provide college transcripts to support your educational claims.

How to apply

To apply for this position, you must complete the online application and submit the documentation specified in the Required Documents section below. A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration. To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application. Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process. After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process. You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application. To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/. If you require a Reasonable Accommodation to complete the application or hiring process, please contact CPT Ariane Hakizimana at (515) 252-4447 or ariane.i.hakizimana.mil@army.mil.

Required documents

To apply for this position, you must submit a complete Application Package which includes: Your resume showing work schedule, hours worked per week, dates (format should include Month and Year) of employment and duties performed. Additional Supporting Documents (if applicable): Cover Letter, Transcripts, DD 214, SF-50, ect.

Additional information

ENLISTMENT CASH BONUSES: Acceptance of a technician position may affect any bonus and/or educational assistance that may be applicable. Please contact your Education Office prior to accepting a position with the Iowa Army National Guard. Participation in direct deposit is mandatory. If you are a male applicant born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you are not eligible for appointment in this agency (https://www.sss.gov/RegVer/wfRegistration.aspx).