SURFACE MAINTENANCE MECHANIC

Summary

THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION. This National Guard position is for a Surface Maintenance Mechanic, Position Description Number D1195000 and is part of Unit Equipment Training Site (UTES) of the Vermont Army National Guard. *This position is located in Jericho, VT* The announcement may close prior to end date if position is filled prior to end date.

Duties

MAJOR DUTIES: (1) Performs maintenance, troubleshooting, and major repair on heavy-duty mobile equipment, combat, tactical, and automotive vehicles. This may include self-propelled artillery, tracked cargo and personnel carriers, road graders, mobile cranes, front loaders, bulldozers, power shovels, tanks, tracked combat vehicles, all terrain vehicles, semi trailers, forklifts, tractors, and accessory equipment. Troubleshoots, repairs and/or overhauls, as a regular and recurring duty, a variety of the mechanically complex major systems to include internal combustion engines, turbine engines, automatic and non-automatic transmissions, heavy duty drive line systems, and hydraulic utility systems and controls, cross drive or similar multi-system transmissions and a variety of intricate fuel injection systems. Makes repairs and modifications to assemblies and components such as voltage regulators, generators/alternators, brake cylinders, etc., for use or placement in systems for which they were not specifically designed. Improvises work when standard procedures do not apply. (2) Troubleshoots equipment with a variety of the mechanically complex major systems and diagnoses difficult performance problems and the cause of mechanical failures by means of visual and auditory checks, uses test equipment such as engine analyzers, compression testers, voltmeters, ohmmeters, pressure gauges and computer diagnostic tools. Utilizes embedded diagnostics in equipment and a wide variety of specialized original equipment manufacturer system analyzers in order to determine the exact nature or extent of repair. Determines what adjustments may be necessary to complete work orders, and whether any additional repairs other than those specified or indicated on the work order are necessary. (3) Removes and disassembles engines and complex major assemblies, sub-assemblies, components, and fuel, hydraulic, and oil pressure systems. Makes the appropriate repairs, overhaul, or modifications in accordance with the proper repair specifications and procedures, and improvises repair techniques when standard procedures are not available. Reassembles engines and other systems, and adjusts, tests, and reinstalls in vehicles and equipment as necessary. Makes adjustments and repairs to electrical and suspension systems. Repairs equipment with a variety of interconnected systems to include state of the art electrical and electronic, fuel injection, interconnected gear reduction, multiple engine, and similarly complex systems. Improvises, substitutes, or alters components or parts to fit into systems for which the items were not specially designed or finds other ways to correct defects when existing methods and procedures do not give desired results. (4) Independently performs repairs and maintenance functions with little or no supervision in remote locations. Provides technical guidance and specialized team leadership to lower grade employees within the team. Assists lower grade mechanics in performing major repair work on interconnected complex systems such as electrical, air and hydraulic systems, complex state of the art electrical and electronic systems that use specialized diagnostic equipment to identify problems, complex fuel injection systems and other similar complex systems. May provide Field and limited Sustainment maintenance at unit locations as part of a "contact team." (5) Conducts readiness and repair inspections on vehicles and associated equipment supported by the activity. Performs operational inspections and ensures vehicles and equipment are properly serviced, including brake adjustments, replacing hydraulic fluids, greasing, cleaning, etc., and performs other preventive maintenance operations as required. Inspects supported equipment prior to use during Inactive Duty Training (IDT) and Annual Training (AT), to ensure that it is functioning properly. May inspect in-process repair work of lower graded repairer to ensure equipment is being repaired in accordance with pertinent requirements. May serve as a commodity inspector during Command Maintenance Management evaluations (COMET) or as a member of a Maintenance Assistance Instruction Team (MAIT). Instructs operator/crew in the maintenance of equipment and provides technical advice and assistance to supported units when requested. (6) Performs electrical repairs on complex state of the art electrical and electronic systems requiring extensive training on specialized diagnostic equipment to identify problems. (7) Assists in the maintenance of production reports and records, and makes recommendations to the supervisor. Plans, organizes, and performs technical analyses as required or assigned. Makes recommendations to the supervisor as to adjustments necessary to effectively, efficiently and economically accomplish the work and maximize production. (8) Performs other duties as assigned.

Qualifications and evaluation

Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration. Your qualifications will be evaluated on the following knowledge, skills, abilities and other characteristics: -- Extensive knowledge of the mechanical makeup, operation, and working relationships of complex interconnecting systems, assemblies, and parts for a variety of combat, tactical, commercial, special purpose vehicles and equipment. -- Ability to diagnose, repair, overhaul, and modify interconnected complex systems on a variety of combat, tactical, commercial, special purpose vehicles and equipment. -- Extensive knowledge of state of the art electrical, electronic, complex hydraulic, pneumatic, and other major non-mechanical systems that have a functional relationship and effect on the operation of major mechanical systems. -- Extensive knowledge of hydraulic lifting, loading, turning, and positioning systems and their mechanical, hydraulic, pneumatic, electrical, and electronic controls. -- Knowledge of electronics, sufficient to utilize state of the art diagnostic equipment to identify and replace defective components, such as electronic control modules, line replacement units, chips, sensors, printed circuit boards, and other standard components. -- Ability to repair or overhaul major components such as diesel, multi-fuel or gasoline engines, turbine engines, automatic and manual transmissions, drive line assemblies, electrical and electronic systems and accessories, fuel injection systems, and emission control systems. -- Skill to use a wide variety of test and diagnostics equipment to perform fault isolation and conduct repair of combat, tactical, commercial, special purpose vehicles and equipment. Ability to operate and understand original equipment manufacturer state of the art computerized diagnostic equipment and embedded diagnostics. Knowledge and understanding of how measurements and tolerances impact on the mechanical, hydraulic, pneumatic, electronic, and electrical systems and the components of each system. -- Skill and knowledge to develop or improvise methods, alter parts, and make repairs in the absence of technical guidelines (such as modifying parts to fit and mesh into systems for which the parts were not designed); improvise modifications to equipment to correct recurring malfunctions; and design modifications to meet special test requirements or other special needs. Please be advised that the applicant rating will be evaluated on the following occupational competencies: 1. Interpersonal Skills 2. Mechanics 3. Oral Communication 4. Self-Management 5. Standards

Education

There are no specific educational requirements for this position.

How to apply

To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below. A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration. To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application. Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process. After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process. You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application. To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/

Required documents

To apply for this position, you must submit a complete Application Package which includes: 1. Resume: resume must show relevant experience, where you worked, job title, detailed duties and accomplishments written in your own words (Do not plagiarize), employer's name and address, supervisor's name and phone number, starting and ending dates (including Month and Year, e.g., 02/2017, Feb 2017, etc.), hours per week and salary. If you are a current Federal employee or previous Federal employee, provide your position title, pay plan, series and grade. Your detailed experience should be listed under each job title with starting and ending dates. Resume must show applicants name and contact information. 2. AGO-VT Form 690-5, Military Experience and Education Resume (All applicants, currently serving in the military, prior-service and civilians MUST complete the name block and military affiliation block of the AGO-VT Form 690-5 and sign and date the form). Other supporting documents (as applicable) For current Federal employees: Latest SF 50, Personnel Action. DD-214 Transcripts Certifications Helpful Hints for Applying: - Ensure that your resume contains your full name, address and phone. - Include details about the experience that relates to the position you are applying for. - Be specific and always include Month and Year for the dates of your experience. - Be sure to include your applicable military experience and explain the duties of the MOS/AFSC held. In describing your experience, please be clear and specific. Please note that if, after reviewing your resume and or supporting documentation, a determination is made that you have inflated your qualifications and or experience, your rating can and will be adjusted to more accurately reflect your abilities, or you may lose consideration for this position. If you are using education to qualify for this position or education is a mandatory requirement to meet qualifications, You must submit copies of college transcripts that identify each course, the college or university, semester or quarter hours earned, grade and grade-point received. Submitting a certificate or a degree will not suffice. You must submit transcripts when required. Photocopies are acceptable. If you have been or currently are a Federal Civil Service employee, please submit a copy of your last Notification of Personnel Action, Form SF-50 if applicable.

Additional information

The purpose of this position is to troubleshoot, repair, maintain, inspect, and/or overhaul a variety of complex combat, tactical, commercial, and special purpose vehicles and equipment having complicated mechanical and non-mechanical systems with a variety of interconnected systems. Provides technical guidance and specialized team leadership to lower grade employees. If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (https://www.sss.gov/RegVer/wfRegistration.aspx). Vermont Army National Guard personnel who are bonus recipients/student loan repayment program recipients may have their benefits terminated and/or recouped if selected as a Permanent/Indefinite Military Technician. Applicants should contact the VTARNG Incentive Manager to determine any possible termination and/or recoupment actions that may result from accepting this position.