UAS OPERATOR

Summary

THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION. This National Guard position is for a UAS OPERATOR, Position Description Number D1999000 and is part of the ID 116th Brigade, National Guard.

Duties

(1) Serves as a member of a UAS mission crew. Performs as aircraft operator (AO) or payload operator (PO) during inactive duty training (IDT), annual training (AT), additional flight training period (AFTP), and pre-mobilization and post-mobilization training periods. Incumbent is subject to various duty periods, including reverse-cycle training periods in order to support unit training requirements. Incumbent is responsible for ensuring proper flight plan submission prior to commencement of each mission. Ensures all aircraft operator and payload operator planning requirements are completed prior to the commencement of each mission. The incumbent trains to perform both the Aircraft Operator and the Payload Operator duties as he/she may be assigned either responsibility for each mission. Participates in and/or facilitates Crew Mission Briefing meetings where each crewmember is assigned his/her specific mission duties and responsibilities and is provided time to ask any mission specific questions. Performs mission planning tasks directed by the Mission Commander. a. Aircraft Operator (AO) Duties: -As assigned, operates the mission planning system. Performs software loading and configuration. Enters and verifies the mission waypoints and parameters. Builds and displays threat, target, air traffic control (ATC) restrictions, and air corridors. Builds and displays the mission required payload plan. -Performs preflight inspections. Ensures that proper preflight checks are verified in accordance with operator manuals and checklists. Ensures all required forms are completed and that the appropriate information has been entered into each form or electronic equivalent. -Completes engine start and systems checks, ensuring that the engine, related systems, and equipment are operating properly. Ensures all checklist items are completed prior to the start of all missions. -Responsible for radio communications. Tunes the system radios and monitors assigned frequencies utilized during the mission. If two simultaneous frequencies are being utilized, keeps the PO informed of any actions or communications conducted on the assigned frequency. Establishes communications with the appropriate ATC facility. Monitors the frequency before transmitting and uses appropriate call signs when acknowledging each communication. Transmits pilot reports, position reports, and flight plan changes. When advised to change frequencies, acknowledges the transmission before making the change and selects the new frequency at the appropriate time. -Performs assigned launch and post-launch procedures in accordance with appropriate operator manuals and checklists. Coordinates with ground crew during the launch process to ensure successful departure from the launcher. -Operates the aircraft in Knob Control. Changes heading commands to meet mission waypoints, adjusts controls for winds, adjusts airspeed commands to meet time-over-target (TOT) requirements while staying within operating parameters. Adjusts altitude commands to meet waypoint requirements. Coordinates with the PO. Uses the map display or appropriate paper map to determine the correct magnetic heading to the next waypoint or target with corrections for wind. Determines the distance to the next waypoint or target, calculating the proper airspeed to reach the waypoint/target within the specified time and operational parameters. Initiates new airspeed command on the airspeed slider on the unmanned aircraft (UA) control panel. Monitors pitch indication and airspeed for proper response. Sets the altitude command, with the altitude slider on the UA control panel, for the correct altitude for the next waypoint/target. Monitors throttles/revolutions per minute (RPM) and engine instruments as well as altitude and rate-of-climb indicators for proper response. If the next target is too close to fit within time over target (TOT) specifications, adjust heading to delay arrival on the waypoint/target. -Performs fuels management procedures. Determines necessary fuel requirements. Calculates mission flight time based on total distances from launch to recovery. Calculates the maximum amount of flight time by determining the number of liters of fuel expended per hour, taking into account the fuel necessary for launch and recovery. -Perform Flight Utilizing Automatic Flight Modes. Announces all flight mode changes. Verifies that the UAS enters the selected flight mode by monitoring the flight mode section of the UA control panel. -Performs all emergency procedures described in the operator's manual or checklist. In the event of adverse meteorological conditions, maintains control of the UA; maneuvers the UA out of obscurations; directs the aircraft to climb, descend, or turn as required. Sets the transponder to the appropriate code. -Performs Tactical Automated Landing System (TALS) Recovery procedures. (2) Performs other duties as assigned.

Qualifications and evaluation

Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.

Education

There are no additional educational requirements for this position.

How to apply

To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below. To view the Occupational Questionnaire, click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/13033993 A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration. To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application. Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process. After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process. You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application. To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.

Required documents

To apply for this position, you must submit a complete Application Package which includes: 1. Your resume showing: Contact Information-your name and the best way to contact you. Relevant work experience-include the employer's name, job title, start and end dates (month/year), the number of hours worked per week and describe how you meet the required qualifications of the job. Federal jobs should include series and grade. Education, certifications or licensures.

Additional information

If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (Register | Selective Service System : Selective Service System (sss.gov)). Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Candidates will not be hired based on their race, sex, color, religion, or national origin. MORE THAN ONE SELECTION MAY BE MADE FROM THIS ANNOUNCEMENT IF ADDITIONAL IDENTICAL VACANCIES IN THE SAME TITLE, SERIES, GRADE AND UNIT OCCUR. THE EFFECTIVE/START DATE FOR THIS POSITION WILL BE IAW THE SECRETARY OF DEFENSE GUIDANCE ON THE TITLE 32 DUAL STATUS MILITARY TECHNICIAN HIRING FREEZE EXEMPTION DATED 29 MARCH 2025.