ENVIRONMENTAL ENGINEER

United States Fleet Forces Command

Kittery, Maine$84,579 - $131,790Full-timePosted 23h ago

Get more Environmental Engineer openings

A short daily email when similar roles appear in Kittery, Maine. No account needed.

Summary

This is a public notice flyer to notify interested applicants of anticipated vacancies. Applications will not be accepted through this flyer. Interested applicants must follow the directions in the "How to Apply" section of this flyer to be considered. There may or may not be actual vacancies filled from this flyer. Notice of Result letters will not be sent to applicants who respond to this flyer.

Duties

You will conduct pollution control surveys throughout the Shipyard to investigate compliance with applicable standards. You will represent the Portsmouth Naval Shipyard during negotiations with regulatory agencies and public hearings associated with environmental permit/licensing processes. You will advise management on new environmental regulations having an impact on operations. You will complete permit applications and submit changes as necessary for management review.

Qualifications and evaluation

In order to qualify for this position, your resume must provide sufficient experience and/or education, knowledge, skills, and abilities to perform the duties of the specific position for which you are being considered. Resumes are restricted to no more than 2 pages. Illegible/unreadable resumes will not be considered. Your resume is the key means we have for evaluating your skills, knowledge, and abilities as they relate to this position. Therefore, we encourage you to be clear and specific when describing your experience. As vacancies occur, the Human Resources Office will review your resume to ensure you meet the hiring eligibility and qualification requirements listed in this flyer. You will be rated based on the information provided in your resume, along with your supporting documentation. If selected, you may be required to provide additional supporting documentation. If after reviewing your resume and supporting documentation, a determination is made that you inflated your qualifications and/or experience, you may be found ineligible/not qualified. Please follow all instructions carefully. Errors or omissions may affect your rating or consideration for employment. All qualification requirements must be met before being considered for any vacancies.

Education

BASIC REQUIREMENTS: All applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual in A. or B. below in order to qualify for this position: A. Successful completion of a Bachelor's degree or higher in Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying professional engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org 2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html. 3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above). 4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.) POSITIVE EDUCATION REQUIREMENTS: This position has a Positive Education Requirement. In order to verify that you meet the positive education qualifications for this position, you must submit a complete copy of your transcripts (unofficial transcripts are acceptable) or an itemized list of college courses which includes equivalent information from the transcript (course title, semester/quarter hours and grade). Failure to provide this information will result in an ineligible rating. Education completed in foreign colleges or universities may be used to meet the qualification requirements if the applicant can provide documentation indicating that the foreign education is comparable to that received in an accredited educational institution in the United States. It is the responsibility of the applicant to provide such evidence when applying. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/

How to apply

Interested Applicants must submit resumes/application packages to: flthro_pnsy_staffing_3@us.navy.mil Facsimile applications will not be considered. All resumes/applications must be received no later than the close date of this flyer. Resumes are restricted to no more than 2 pages. Illegible/unreadable resumes will not be considered. It is the applicant's responsibility to verify that all information in their resume and documents, are received, legible, and accurate. HR will not modify answers/documents submitted by an applicant. Failure to submit a complete application package will result in an ineligible rating and loss of consideration.

Required documents

A complete resume is required. Resumes are restricted to no more than 2 pages. Illegible/unreadable resumes will not be considered. Your resume must show relevant experience, job title, duties and accomplishments. Your resume must show complete information for each job entry to support minimum qualifications. The following information should be provided in your resume: employer's name, starting and end dates (Mo/Yr), hours per week if experience was less than full time (35-40 hours per week), and pay plan, series and grade level (e.g. GS-0201-09) for relevant federal experience. TIP: A good way to ensure you include all essential information is to use the Resume Builder in USAJOBS to create your resume. Are you claiming membership in any professional organizations, or possession of a license, certificate or credentials? Check the Conditions of Employment section above to see if any are required. If you claim membership, license, certification, or credentials, you must submit a copy of said document in your application package. Are you using education as a substitute for some or all of the experience requirement? Is there a basic education requirement for this position? Check the Education section above to see what is allowed and what is required. Any claims you make in your resume or assessment questionnaire regarding education or degrees MUST be supported by submitting with your application official or unofficial transcripts or a list of courses, grades earned, completion dates, and quarter and semester hours earned issued from your school. While unofficial transcripts are acceptable for initial application, an official transcript will ultimately be required if you are selected for the position. You may submit a copy your degree(s) if specific coursework does not have to be verified. Are you a veteran claiming 5-point veterans' preference or claiming sole survivorship preference? You must submit a copy of your latest DD-214 Certificate of Release or Discharge from Active Duty (any copy that shows all dates of service, as well as character of service [Honorable, General, etc.] is acceptable) OR a VA letter that shows dates of service or service connected disability AND character of service. If you have more than one DD-214 for multiple periods of active duty service, submit a copy for each period of service. If you were issued a DD-215 to amend aforementioned information on the DD-214 you must submit that too. If you are not sure of your preference eligibility, visit the Department of Labor's website: Veterans' Preference Advisor Are you a disabled veteran or claiming 10-point veterans' preference? If you are eligible to claim 10 point veterans preference you must submit a DD-214 Certificate of Release or Discharge from Active Duty as described above for 5-point preference. You must also provide the applicable supporting documentation of your disability (e.g. disability letter from the VA) as described on Standard Form-15 (SF-15). http://www.opm.gov/forms/pdf_fill/SF15.pdf. Are you an active duty service member? Active Duty Service Members are required to submit a statement of service printed on command letterhead and signed by the command. The statement of service must provide the branch of service, rate/rank, all dates of service, the expected date of discharge and anticipated character of service (Honorable, General, etc.). Application documents, including supplemental ones, may be shared outside the Human Resources Office. Supplemental documents may contain your SSN, DOB, or personal information of others (e.g., on military orders, marriage certificates). You may redact this information before submitting; however, if selected, you must provide unredacted originals.

Additional information

COVID VACCINATION INFORMATION: To comply with the recent preliminary nationwide injunction on Executive Order 14043, Requiring Coronavirus Disease 2019 Vaccination for Federal Employees, the Department of the Navy is not taking any action to implement or enforce the COVID-19 vaccination requirement. New hires will need to provide their vaccination status as well as comply with workplace safety protocols related to masking, physical distancing, testing, travel, and quarantine. Vacancies filled from this announcement may be filled at any grade level listed. This position has potential for promotion to the target grade of GS-12 without further competition. Promotion to the GS-12 grade level will be made after qualifications and eligibility requirements have been met and upon the supervisor's recommendation. Promotion is neither implied nor guaranteed. This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. The work involves both field work and work in an office environment. Field work may include field inspections and investigations which involve climbing, bending, crouching, common to shipboard, waterfront, and industrial shop environments. Field work may expose the incumbent to dirty conditions, adverse weather, hazardous material or hazardous waste environments, and any other environment found at a highly industrialized site. If you are unable to apply online and request information about the Alternate Application process, please contact the Department of Navy's Employment Information Center. Federal Annuitant Information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf Interagency Career Transition Assistance Program (ICTAP): To be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating in the highly qualified category (score 85) or higher. ICTAP candidates must provide copies of all of the following documentation at the time of application: 1) agency notice; 2) most recent performance appraisal; and 3) most recent SF-50 or notification of personnel action that includes position, grade level, and duty location. Applicants who do not provide this documentation will not receive consideration as an ICTAP candidate. For more information about ICTAP eligibility please review the following link: https://www.usajobs.gov/Help/working-in-government/unique-hiring-paths/federal-employees/career-transition/ Military Spouse Preference applicants will receive priority consideration at the Full Performance Level (FPL) and if determined to be Best Qualified at the FPL, and selected, must be placed at the FPL. A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position.

The average job posting receives 250 applications.

Stand out by tailoring your resume to this specific role. Our AI resume builder highlights the skills and experience that matter most to this employer.

Frequently asked questions

Who is hiring for ENVIRONMENTAL ENGINEER at United States Fleet Forces Command?+
United States Fleet Forces Command is actively hiring for this ENVIRONMENTAL ENGINEER role. Click "Apply Now" to submit your application directly on United States Fleet Forces Command's careers page — Careeronaut doesn't charge employers or candidates for referrals.
When was this ENVIRONMENTAL ENGINEER role posted?+
This listing was first posted on 2026-08-07. We pull the latest copy from the source feed daily, and any role that's taken down gets removed from Careeronaut within seven days so you don't waste time on stale listings.
How should I apply to this ENVIRONMENTAL ENGINEER role?+
Start by tailoring your resume to the posting — most applicants send generic CVs and the first filter recruiters use is keyword relevance. Careeronaut's AI does this automatically: paste the job description, get a matched resume in under a minute, and download as PDF or DOCX.
Where can I find more Environmental Engineer jobs in Kittery, Maine?+
Browse all open environmental engineer roles in Kittery, Maine on the listing pages linked below. You can filter by salary, remote-friendly, and posting date.