Civil Engineer
Mine Safety and Health Administration
Get more Civil Engineering openings
A short daily email when similar roles appear in Pittsburgh, Pennsylvania. No account needed.
Summary
This position is with Department of Labor, Mine Safety and Health Administration (MSHA), Technical Support, Mine Waste & Geotechnical Engineering Division. MSHA works to prevent death, illness and injury from mining; promote safe and healthful workplaces for U.S. miners. MSHA carries out the provisions of the Federal Mine Safety and Health Act of 1977 (Mine Act) as amended by the Mine Improvement and New Emergency Response (MINER) Act of 2006.
Duties
The responsibilities described are for the full performance level GS-12. At developmental grade levels, assignments will be of more limited scope performed with less independence, and limited complexity. Employs basic and advanced engineering concepts and applied research techniques in executing duties and transfers the results of highly theoretical or complex studies to practical applications. Review engineering plans for dams and other mine waste disposal facilities. Evaluate problems in geotechnical engineering such as soil or rock slope stability, rockfalls, foundations, and retaining walls. Analyze structural engineering problems related to the safety of mine structures such as preparation and processing plants, storage facilities, and bulkheads. Analyze safety problems related to mining operations such as haul roads, subsidence, or mining near bodies of water. Conduct field and accident investigations in areas of Division responsibility to make observations and collect data that will allow an assessment of conditions or the cause of an accident to be determined. Develop and deliver technical training on topics related to the Division's mission. Serve as an expert witness in both civil and criminal litigations to provide engineering expertise and services to defend the agency's position. Advise the supervisor of developing issues and trends related to areas of Division responsibility. Provide input to developing a strategy to correct the issue or improve the condition.
Qualifications and evaluation
Your evaluation will be based on how well you meet the qualifications outlined in this vacancy announcement, as demonstrated through your resume and supporting documentation. You may preview application questions for this vacancy here: https://apply.usastaffing.gov/ViewQuestionnaire/13025933 SME Resume Panel Review Subject Matter Experts (SMEs) will review your resume to assess your technical qualifications based on the competencies listed below. Applicants who meet the required qualifications will advance to the next stage of the hiring process. For each below competency, SME(s) will provide a rating of 0-Not Applicable, 1-Awareness, 2-Basic, 3-Intermediate, 4-Advanced, or 5-Expert based on the content of your resume. Evaluation Factors (Competencies) - All qualified applicants will be evaluated on the following key competencies: Civil Engineering Mine Safety and Health Planning and Evaluating Technical Competence Click here for Evaluation details. The information you provide may be verified by a review of your paid, unpaid, and volunteer work, as it demonstrates the competencies or skills required for the position to be filled. Your evaluation may include an interview, reference checks, or other assessment conducted by HR specialists, subject matter experts, or panel members and may include other assessment tools (ex. interview, structured interview, written test, work sample, etc.). INFORMATION FOR ICTAP/CTAP ELIGIBLE(S) ONLY: If you are eligible for special priority selection under ICTAP/CTAP, you must be well-qualified for the position to receive consideration. ICTAP/CTAP eligible(s) will be considered well-qualified if they attain at least a rating score of 85 in a numerical rating scheme. Be sure to review the eligibility questions to reflect that you are applying as an ICTAP or CTAP eligible and submit supporting documentation. As a condition of employment for accepting this position, you may be required to serve a 1-year probationary period during which we will evaluate your fitness and whether your continued employment advances the public interest. In determining if your employment advances the public interest, we may consider: - your performance and conduct; - the needs and interests of the agency; - whether your continued employment would advance organizational goals of the agency or the Government; and - whether your continued employment would advance the efficiency of the Federal service. Upon completion of your probationary period your employment will be terminated unless you receive certification, in writing, that your continued employment advances the public interest.
Education
You must meet the Basic Requirements to qualify for Civil Engineer GS-0810, as described below. Transcripts must be submitted to verify education requirements. Basic Requirement: A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. 3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. 4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.) Any applicant falsely claiming an academic degree from an accredited school will be subject to actions ranging from disqualification from federal employment to removal from federal service. If your education was completed at a foreign college or university, you must show comparability to education received in accredited educational institutions in the United States and comparability to applicable minimum coursework requirements for this position. Click Evaluation of Foreign Education for more information.
How to apply
Persons who are deaf, hard of hearing, blind, or have speech disabilities, please dial 711 to access telecommunications relay services. To apply for this position, you must complete the initial online application, including submission of the required documentation specified in the Required Documents section. Your application and ALL required supplemental documents MUST be received by 11:59 pm Eastern Time on the vacancy closing date to receive consideration. Important - Save your information before the 30 minute system timeout! For help, go to USAJOBS Help Center. STEP 1 - Create USAJOBS Account on www.usajobs.gov, including Resume and Saved Documents. For each employment period, include start/end month & year and note full-time or part-time (if part-time, include # of hours worked per week) otherwise, your application may be considered incomplete. NOTE: In alignment with the Presidential Memorandum titled Merit Hiring Plan, dated May 29, 2025, applicants may only submit a resume limited to two (2) pages. Only the reΜsumeΜ uploaded under the 'Resume" document type in USAJOBS will be reviewed. If the resume submitted exceeds two (2) pages, the application will be deemed ineligible for further consideration. STEP 2 - Complete the 1st part of the application process (USAJOBS). Once you have identified a job on USAJOBS that you wish to apply for, click on the job title and then click the Apply button. For questions about the vacancy, contact the Agency Contact at the bottom of the announcement. Proceed through the steps noted at the top of the USAJOBS page. You will be able to select a resume and documents from your USAJOBS Account that you can submit as a package as part of your DOL application. In the final step, once you have certified your application, click the Continue to agency site button. STEP 3 - Complete the 2nd part of the application process (DOL). On the Department of Labor (DOL) page, create a DOL Account if you have not already and click Apply to this vacancy. Continue through the progress steps at the top of the DOL page. The 2nd progress step is where you answer the vacancy-specific questions. The 3rd progress step Documents is where you submit the required documents (only if applicable to you) specified in the Required Documents section of this vacancy. STEP 4 - On the Review and Submit step, verify each section of your application is complete and correct. In order to submit your application, you must have a check mark next to each section listed. If there is an X, return to the appropriate section and follow the prompts. When it is ready for submission, certify your application and click the Submit Application button. STEP 5 - Edit Application as needed by 11:59 pm Eastern Time of Closing Date by returning to USAJOBS, clicking the vacancy, then Update Application. To update your application, including supporting documentation: During the announcement open period, return to your USAJOBS account, find your application record, and click Edit my application. This option will no longer be available once the announcement has closed. To view the announcement status or your application status: Visit https://www.usajobs.gov/Help/howto/application/status/. Your application status page is where you can view your application status, USA Hire assessment completion status, and review your notifications sent by the hiring agency regarding your application. NOTE: It is your responsibility to ensure your responses and appropriate documentation is submitted prior to the closing date. For more detailed information on applying for positions with DOL click here to view the U.S. Department of Labor, How to Apply website.
Required documents
The following documents must be submitted by 11:59 p.m. (ET) on the vacancy closing date. ELIGIBILITY REQUIREMENTS: Applicants must meet the eligibility requirements of time-in-grade (52 weeks at the next lower grade), time-after-competitive-appointment (90 days), and minimum qualifications (52 weeks equivalent to the next lower grade in federal service). These requirements must be met within 30 days of 08/20/2026 the announcement closing date. The following documents are required from all applicants (PLEASE READ CAREFULLY): FEDERAL STATUS APPLICANTS: When applying as a status candidate with current or former Federal Service, please provide a copy of your last or most recent SF-50, Notification of Personnel Action which shows your appointment eligibility for the position for which you are applying. Your SF-50 must identify the highest grade you held on a permanent basis, Pay Plan/Pay Schedule, Series, Grade/Pay Band, and career status. Multiple SF-50 may be submitted to demonstrate your highest previous rate and eligibility. *WARNING: An award SF-50 (ex. cash or time off award) may not indicate grade, step, and competitive status. For current DOL employees, an award SF-50 DOES NOT indicate grade and step. Resumes are required - provide a resume either by creating one in USAJOBS or uploading one from your computer and USAJOBS profile. To receive full consideration for relevant and specialized experience, please list the month, year, and number of work hours worked for the experience listed on your resume. We also suggest that you preview the vacancy questions and confirm that your resume supports your question responses. Most recent performance appraisal/evaluation signed and dated within 18 months is requested by the agency but will not disqualify candidates if not submitted. If not submitted during the application process, one may/will be requested at the time of the interview if the opportunity is extended. *In most cases, ICTAP/CTAP applicants must submit this document - please see ICTAP/CTAP links below for more details. The following documents are required (if applicable): Displaced Employee Placement Documents - Only required if requesting priority consideration under Interagency Career Transition Assistance Plan (ICTAP) and Career Transition Assistance Plan (CTAP) Eligibility. Click/Review these ICTAP/CTAP links to confirm what must be submitted as proof that the requirement has been met. DD-214 - verifying military service, eligibility for consideration under the Veterans Employment Opportunity Act (VEOA), and showing the character of discharge (ex. Member Copy 4 and 2 are acceptable vs. Copy 1 which is not acceptable to adjudicate veteran's preference) Special/Non-Competitive Appointing Authority Documents - Applicants who are eligible for consideration, and wish to be considered, under one of the following non-competitive hiring authorities must submit appropriate documentation (click on the links below to see the documentation requirements): Military Spouses (MISP) Land Management Eligible(s): a copy of your most recent Notification of Personnel Action (SF-50 or equivalent) proving your eligibility for appointment under the Land Management Workforce Flexibility Act. This service must have been performed in competitive service, under a time-limited appointment in a Land Management Agency, as defined by P.L. 114-328. For more information, click here. Unofficial Transcript(s) (in English) - If you are using education as a basis for qualifying for this position, you must submit all applicable academic transcripts demonstrating that you meet the qualifying educational requirements (ex. BA/BS, MA, JD, Ph.D., etc.). If specific coursework is required to qualify, you must supply an unofficial transcript from each academic institution in which the required courses were taken in order to receive credit. You may upload your unofficial transcript(s) as one document with a maximum size limit of 5 MB. NOTE: The OFFICIAL Transcript(s) MUST BE RECEIVED, if you are selected, and prior to receiving the firm offer with a start date. Reference the Education Section for College Transcript and Evaluation of Foreign Education. Do not upload password-protected documents. Applicants selected for employment who are not current DOL employees will be required to provide proof of citizenship, and the E-Verify system will be used to confirm the employment eligibility of all new hires.
Additional information
Applicants must meet all legal and regulatory requirements. Reference the Required Documents section for additional requirements. The mission of the Department of Labor (DOL) is to protect the welfare of workers and job seekers, improve working conditions, expand high-quality employment opportunities, and assure work-related benefits and rights for all workers. Refer to these links for more information: GENERAL INFORMATION, REASONABLE ACCOMMODATIONS, ADDITIONAL DOCUMENTATION, FORMER FEDERAL EMPLOYEES As a condition of employment, all personnel must undergo a background investigation for access to DOL facilities, systems, information and/or classified materials before they can enter on duty: BACKGROUND INVESTIGATION This position is inside the bargaining unit. If the duty location is within the Washington, D.C. metropolitan area, the position will be included in the Local 12, AFGE bargaining unit. If the duty location is outside the Washington, D.C. metropolitan area, the position will be included in the NCFLL bargaining unit. This position is subject to the confidential financial disclosure requirements of the Ethics in Government Act of 1978 (P.L. 95-521). Therefore, if selected, you will be required to complete a Confidential Financial Disclosure Report (OGE Form 450) to determine if a conflict or an appearance of a conflict exists between your financial interest(s) and your prospective position with DOL. This information will be required annually. All MSHA employees and their spouses, and minor children are prohibited by regulation from having any interest, direct or indirect, in any mine or mining company that may be directly affected by the work of MSHA through its investigations, technical research, or other activities. These interests are prohibited under the Department of Labor's Supplemental Standards of Ethical Conduct Regulations at 5 CFR 5201.105. Certain MSHA employees are required to file a financial disclosure report. For questions, please contact Wendy Elschide at elschide.wendy.m@dol.gov or 202-693-1000 X19878. Based on agency needs, additional positions may be filled using this vacancy. The Department of Labor may use certain incentives and hiring flexibilities, currently offered by the Federal government to attract highly qualified candidates. Click here for Additional Information. The Fair Chance Act (FCA) prohibits Federal agencies from requesting an applicant's criminal history information before the agency makes a conditional offer of employment. If you believe a DOL employee has violated your rights under the FCA, you may file a complaint of the alleged violation following our agency's complaint process Guidelines for Reporting Violations of the Fair Chance Act. Note: The FCA does not apply to some positions specified under the Act, such as law enforcement or national security positions. All Department of Labor employees are subject to the provisions of the Drug-Free Workplace Program under Executive Order 12564 and Public Law 100-71.
The average job posting receives 250 applications.
Stand out by tailoring your resume to this specific role. Our AI resume builder highlights the skills and experience that matter most to this employer.