MATERIALS EXAMINER AND IDENTIFIER (HAZMAT)
Army National Guard Units
Get more Administrative Assistant openings
A short daily email when similar roles appear in Lincoln, Nebraska. No account needed.
Summary
THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION. This National Guard position is for a MATERIALS EXAMINER AND IDENTIFIER (HAZMAT), Position Description Number D1908000 and is part of the NE USPFO Supply Branch, National Guard. INDEFINITE EMPLOYMENT IS TEMPORARY IN NATURE AND WILL LAST MORE THAN ONE YEAR BUT NO MORE THAN SIX YEARS. BENEFITS ARE THE SAME AS A PERMANENT APPOINTMENT. MAY CONVERT TO PERMANENT WITHOUT FURTHER COMPETITION.
Duties
As a MATERIALS EXAMINER AND IDENTIFIER (HAZMAT), WG-6912-7, duties include: (1) Identifies, receives, sorts, counts, classifies and handles hazardous materials in the USPFO storage areas. Performs pre-receipt examination of property on site at the generation point and assures that the turn-in and shipping is in order, that the containers meet standards are placarded and marked properly. As appropriate, performs or initiates required testing e.g. radioactive surveys/wipe tests, prepares sample for submission to environmental laboratories for analysis. Schedules the receipt of property and assures that the property is identified to include identification of all contaminants. Rejects property not meeting turn-in requirements and assists the turn-in activity to correct any rejections and determines the nature and degree of the particular hazards involved. Determines if containers are Department of Transportation (DOT) approved, safe to handle, non-leaking, capable of withstanding routine handling, and safe for required periods of storage. Assures that storage compatibility is adhered. Determines the need for special handling/specials storage of certain property (e.g. friable asbestos, batteries, pesticides, etc.) Performs complex searches of shipping and storage records, material specifications, vendor contracts and computer data for material specifications and advises non-trained personnel on specialized procedures. (2) Insures the safe receipt, storage and movement of hazardous and toxic materials and substances such as ammunition, explosives, chemicals, or radioactive materials in accordance with facility and regulatory requirements. Determines storage requirements, arrangement of materials of materials, and space utilization. Insures compliance with Federal, state, Department of Defense (DoD), Occupational Safety and Health Administration (OSHA), and the Environmental Protection Agency (EPA) rules or regulations. (3) Responsible to identify, collect, process and consolidate hazardous waste in preparation for disposal. The incumbent is required to identify, safely process, package, and ship or dispose of a wide variety of hazardous chemicals, products and materials. Responsible to insure compliance with environmental rules, regulations and practices relating to hazardous waste material treatment and disposal. Uses computer skills to retrieve data pertaining to storage, and processing of hazardous wastes. Manages the facility hazardous materials spill prevention, containment and clean up program to control accidental spills, overflows, and other emergency hazardous waste and materials situations. The incumbent manages the Material Service Data Sheet (MSDS) library and ensures that all material information is complete, current and assessable to employees. (4) Receives or rejects materiel, equipment, including non-standard equipment, and complex assemblies for the facility based on their knowledge of products, equipment, and procedures as well as having the ability to determine subtle and inconspicuous defects. May be required to perform pre-receipt examination of property on site at the generation point. Schedules the receipt of property and assures that the property is identified to include identification of all contaminants. Handles damaged and unidentified shipments requiring repair/repacking or return to the supplier in accordance with established procedures. As appropriate, performs or initiates required testing, e.g. radioactive surveys/wipe tests, prepares sample for submission to environmental laboratories for analysis. (5) Determines acceptance, serviceability and distribution requirements for perishable, classified, precious metals, textiles, clothing, complex electronic/mechanical equipment, assemblies and components. Uses catalog data/drawings, item specifications, or computerized data to verify/determine/classify items for turn-in, storage or distribution. Performs extensive research on equipment specifications using automated systems, technical manuals and supply bulletins to determine any special requirements for complex items passing through the storage and distribution area. (6) Performs a full range of warehousing activities to include receiving, inspecting for defects, storing, selecting and shipping general or specialized bulk and bin materials and equipment. Develops, or assists in the development of plans for storage and arrangement of stock. Determines warehouse configuration, setup, movement, and space utilization plans in accordance with regulations for a specific commodity or equipment group. Performs other duties as assigned.
Qualifications and evaluation
Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. Your answers to the assessment questionnaire will be verified against information provided in your resume and other supporting documentation. Be sure that your resume clearly supports your responses to all the questions addressing experience and education relevant to this position. In describing your experience, please be clear and specific, we will not make assumptions regarding your experience. If, after reviewing your resume and supporting documentation, a determination is made that you have inflated your qualifications or experiences, your rating will be adjusted or you may be excluded from consideration for this position. Your qualifications will be evaluated against general and specialized experience under the "Qualifications" section.
How to apply
To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below. To view the Occupational Questionnaire, click the following link: A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration. To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application. Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process. After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process. You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application. To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.
Required documents
To apply for this position, you must submit a complete Application Package which includes: 1. Your resume showing: Contact Information-your name and the best way to contact you. Relevant work experience-include the employer's name, job title, start and end dates (month/year), the number of hours worked per week and describe how you meet the required qualifications of the job. Federal jobs should include series and grade. Education, certifications or licensures. 2. Other supporting documents (optional) Cover Letter DD-214 SF-50
Additional information
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (https://www.sss.gov/RegVer/wfRegistration.aspx). Individuals with military incentive bonuses may be subject to recoupment. As a condition of employment for accepting this position, you may be required to serve a 2-year trial period during which we will evaluate your fitness and whether your continued employment advances the public interest. In determining if your employment advances the public interest, we may consider: - your performance and conduct; - the needs and interests of the agency; - whether your continued employment would advance organizational goals of the agency or the Government; and - whether your continued employment would advance the efficiency of the Federal service. Upon completion of your trial period your employment will be terminated unless you receive certification, in writing, that your continued employment advances the public interest.
The average job posting receives 250 applications.
Stand out by tailoring your resume to this specific role. Our AI resume builder highlights the skills and experience that matter most to this employer.
More open roles at Army National Guard Units
HR SPEC (LABOR RELATIONS/CLASSIFICATION)(T5)
Montgomery, Alabama
HR SPEC (MILITARY) (Title 32) (Permanent)
Richmond, Virginia
Surface Maintenance Mechanic Leader (Title 32) (Permanent)
Fort Pickett, Virginia
Supply Management Specialist (Title 32) (Indefinite)
Richmond, Virginia
Supply Systems Analyst (Title 32) (Indefinite)
Richmond, Virginia
ELECTRONICS MECHANIC
Longmont, Colorado