ELECTRONIC INTEGRATED SYSTEMS MECHANIC (Title 32)

Summary

This position is located at the 149th AMX SQ, Kelly AFB, San Antonio, TX. The primary purpose of this position is to install, modify, overhaul, maintain, troubleshoot, repair, align, calibrate, and rebuild multi-system avionics complexes consisting of multiple completely integrated electronic avionics systems where the complex accomplishes a number of major functions. Texas is one of 9 states with NO state income tax.

Duties

As a ELECTRONIC INTEGRATED SYSTEMS MECHANIC (Title 32) with the Texas National Guard, your duties will include, but will not be limited to: Performs scheduled and unscheduled maintenance on one or more multi-complex electronic integrated systems. Completes operational checks, inspections, tests, trouble shooting, removal and replacement of Line Replaceable Units (LRUs) which are linked with integrated systems and LRUs which are independent or associated with nonintegrated systems. Isolates unusual malfunctions using technical orders, schematics, wiring diagrams, tools, and test equipment including automatic test equipment and Flight Line Test Systems (FLTS). Solves complex problems by analyzing installation, circuitry, and operating characteristics of the systems. Adjusts and aligns system sensors, transmitters, amplifiers, power supplies, display devices, controls, transponders, actuators, servos, computers and other related components. Installs serviceable components into aircraft and performs total systems alignment and harmonization in accordance with existing technical orders and directives. Reviews and analyzes maintenance data; determines if criteria are sufficient to provide adequate test, troubleshooting and repair procedures; devises and recommends tests, procedural changes, or data corrections. Aligns, adjusts, and performs final calibrations on integrated systems to determine successful repairs. Analyzes equipment failure and malfunctions and suggests changes to improve operation. Monitors the operation of complex, interrelated systems, analyzes operating trends, proposes preventative maintenance down time to assure continued operating capability, and recommends components for overhaul or engineering evaluation for disposal. Troubleshoots operational malfunctions and analyzes system performance utilizing aircrew debrief data, Technical Orders, schematic and wiring diagrams, engineering drawings, data analysis, common and system-specific test equipment and built in system tests. Performs on and off-equipment maintenance on systems such as automatic flight control, instruments, communication, navigation, and inertial navigation. Coordinates back shop bench check (if applicable, completes testing, repair, inspection, modification, programming, reprogramming, mating, adjusting, alignment, and analyzing of LRUs and shop replaceable units (SRUs). Uses a variety of test equipment such as automatic test equipment (ATE), oscilloscopes, frequency counters, phase-angle voltmeters, optical alignment equipment, digital pitot-static testers, programming units and special purpose test analyzers. Recommends methods to improve equipment performance, technical data, and maintenance procedures by reporting hardware and software malfunctions, initiates material deficiency reports both on equipment and in technical data, and assists in design changes as necessary. Conducts aircrew debriefing to determine the nature of system malfunctions. Documents all discrepancies and maintenance actions performed by inputting information into the electronic records information systems (i.e.: CAMS, IMDS, GO-81, REMIS). Recommends hardware and software changes. May upload and download chaff/flare dispensers. This hazardous task may involve the inspection, storage and handling of explosive devices; to include flares, chaff, impulse cartridges and similar items. Conducts on-the-job training on assigned systems and related support equipment and tasks to include classroom instruction as necessary. Provides training to lower graded personnel concerned with the repair of integrated avionics systems. Provides training to newly assigned personnel regardless of grade level. Prepares for and participates in Aerospace Expeditionary Force (AEF) tasking, deployments and various inspections and exercises. Processes and accounts for due-in from maintenance (DIFM) supply assets. Ensures that material and equipment are properly stored, protected and maintained and that funds are not obligated for material or parts without proper justification. May be required to perform additional duties such as structural fire-fighting, aircraft fire/crash/rescue duty, serve as a security guard, remove snow, load and handle munitions, launch/recover and service aircraft, operate heavy equipment, maintain facilities and equipment, or serve as a member of a team to cope with natural disasters or civil emergencies. Complies with safety, fire, security, and housekeeping regulations.

Requirements

Appointment Factor(s): This is an Excepted Service position that requires active membership in a compatible military assignment in the Texas Air National Guard and wear of the military uniform. Areas of Consideration: Nationwide. This includes: All currently employed full-time permanent, indefinite and temporary personnel of the Texas National Guard, All current members of the Texas National Guard, and All individuals eligible for membership in the Texas Air National Guard. Incentives: Acceptance of a military Federal technician position may result in termination and / or repayment of military incentives. Please check your contract and contact your servicing Education Services (Incentives) office or the Recruiting/Retention office. Remarks: May be required to work rotating shifts. Texas National Guard Membership is required. National Guard Membership is required. The Texas National Guard is an Equal Opportunity employer. Veterans' preference is not applicable to this position. Direct deposit is mandatory. Trial period required (see remarks) Must be able to obtain and maintain the appropriate security clearance of the position. This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position. Military Requirements: Compatible Military Assignment (per UMD): For Dual-Status Technician positions service affiliation under Title 32 USC 709 is required. Military skill set is determined by AFSC/MOS requirements. Upon selection, individuals must be assigned to a compatible military AFSC/MOS in accordance with statutes and National Guard Bureau regulations and must obtain/maintain all requirements of the AFSC/MOS. AFSC: 2A374, 2A354 Military Grades: E-5/SSgt not to exceed E-6/TSgt

Qualifications and evaluation

Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be qualified, you will be referred to the selecting official for employment consideration.

Education

There is not an educational requirement for this position.

How to apply

To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below. To view the Occupational Questionnaire, click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/12893342~ A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration. To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application. Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process. After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process. You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application. To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.

Required documents

To apply for this position, you must submit a complete Application Package which includes: 1. Your resume should include the following for related positions held: Work schedule (ex. Full-time, part-time, intermittent) Hours worked per week To and From dates (ex. MM/YYYY - MM/YYYY) Duties performed (In describing your experience, please be clear and specific. Assumptions will not be made regarding your experience.) 2. Other supporting documents: Cover Letter DD-214/ Statement of Service Disability Letter (VA) OF-306 Other (1) Resume SF-15 SF-50/ Notification of Personnel Action Veterans Information: Veterans' preference must be validated by formal submissions including all necessary supporting documentation. Acceptable documentation may be: 1. A copy of your DD-214 Member-4 Copy, "Certificate of Release or Discharge from Active Duty," which shows dates of service and discharge under honorable conditions. 2. A "certification" that is a written document from the armed forces that certifies the service member is expected to be discharged or released from active duty service in the armed forces under honorable conditions not later than 120 days after the date the certification is signed. 3. You may obtain a letter from the Department of Veterans Affairs reflecting your level of disability for preference eligibility by visiting a VA Regional Office, contacting a VA call center or visiting their website. 4. If claiming 10 point preference, you will need to submit a Standard Form, SF-15, "Application for 10-point Veterans' Preference". You may obtain a letter from the Department of Veterans Affairs reflecting your level of disability for preference eligibility by visiting a VA Regional Office, contacting a VA call center or online. Click the following link to determine your eligibility for Veterans' Preference. https:// webapps.dol.gov/elaws/vets/vetpref/mservice.ht Vet Tool https://webapps.dol.gov/elaws/vets/vetpref/mservice.htm

Additional information

Additional Information: Trial Period: As a condition of employment, you will be required to serve a 1- 2 trial period during which we will evaluate your fitness and whether your continued employment advances the public interest. In determining if your employment advances the public interest, we may consider: - your performance and conduct; - the needs and interests of the agency; - whether your continued employment would advance organizational goals of the agency or the Government; and - whether your continued employment would advance the efficiency of the Federal service. Upon completion of your trial period your employment will be terminated unless you receive certification, in writing, that your continued employment advances the public interest. Other Requirements: For positions requiring the operation of motor vehicles, candidates must have a valid state driver's license for the state in which they live or are principally employed. For positions requiring a security clearance (Secret or Top Secret) the applicant must possess or be able to obtain a clearance within one year of appointment. Ability to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission. Irregular and/or overtime (compensatory) hours may be required to support operational requirements or contingencies or may be required to work hours outside of the normal duty day. The duties and responsibilities of your job may significantly impact the environment. You are responsible to maintain awareness of your environmental responsibilities as dictated by legal and regulatory requirements, your organization, and its changing mission.