Ammunition Inspector (Title 32) (Permanent)

Summary

THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION. This National Guard position is for a Ammunition Inspector (Title 32) (Permanent), Position Description Number D2280000 and is part of the VA G4, National Guard.

Duties

As a Ammunition Specialist (Title 32), WG-6501-8, you will perform the below duties: Performs Ammunition Inspections pertaining to the receipt, classification, storage, issue and shipment of ammunition items. May receive shipments of all types of ammunition and verify DA form 1348 against Depot surveillance Records for correct NSN and Condition Code. Insures commercial carrier delivering ammunition has been inspected in accordance with regulations and standing operating procedures. Verifies quantity of containers for accuracy of nomenclature, stock and lot numbers against shipping documents and signs for shipments. Receives turn-ins from using organizations, counts each item received and inspects for serviceability. Classifies material to assure compatibility of explosive items. Studies new material to determine how it functions, how it is constructed and compatibility for storage purposes according to technical manuals. Assures that off post shipments of ammunition by commercial carriers are in accordance with ammunition policies and procedures and in compliance with Interstate Commerce Commission (ICC) and DoD regulations. Assures that ammunition is managed by class in accordance with established regulations. Conducts inspection of ammunition being turned-in to determine suitability for further training needs. Takes appropriate steps in this disposition of CCH material. Ammunition Condition Reports (ACRs) are prepared and sent to item manager for disposition of restricted and/or suspended items. If disposition is determined to be locally demilitarized; contact designated EOD team and assist with demilitarization mission. Prepares items for shipment to other depots and/or installations. Using the correct DOT regulations and packing requirements, makes sure all shipments meet DOT requirements. Items to be shipped are palletized and banded according to the hazard class division. Takes each pallet and establishes the correct weight and cube. Uses appropriate technical manuals, determines the proper name and UN number. Using this information, the appropriate 1348's are filled out and sent to Transportation Officer. Studies new material to determine how it functions, how it is constructed and compatibility for storage purposes according to technical manuals. Conducts observations and inspections of ammunition: In storage, inspects ammunition for corrosion from moisture and deterioration. Inspects for dents, loose detonators/fuses, discoloration and softness of dynamite and stains from nitroglycerin. Marks defective ammunition as prohibited for issue. Inspects ammunition of using organizations to determine its condition. Ensure that safety and storage requirements are properly observed. Responds to units which have misfires and/or malfunctions with ammo items. Conducts inspection of ammunition being turned-in to determine suitability for further training needs. Maintains a list of suspended ammunition and prepares listing for reporting excess to proper authorities for disposition. Assures suspended ammunition is withdrawn and no lots issued. Prepares condition reports on all bad ammunition, suspended lots, etc. Directs packaging, stenciling proper loading and blockage of excess ammunition. Verification Inspection. Performs a variety of routine and special inspections of conventional ammunition. Performs quality monitoring of maintenance operations, area inspections magazine storage inspections and basic load inspections. Assists QASAS when requested. Maintains a variety of publications, regulations and files pertaining to work of the unit. The following are typical, but not all inclusive examples of work performed: Performs periodic, storage and special inspections and tests to determine quality safety and condition of a wide variety of ammunition, subcomponents, and materials used in the maintenance, modification and manufacture of ammunition items. Inspects such items as small arms ammunition, artillery and mortar ammunition, rockets, missiles, mines, grenades, bulk high explosives, propellants and propelling charges, etc. Inspects container, checks rounds and other items for defects and deterioration, and separates any questionable items for further inspection. Under the technical direction of a Quality Assurance Specialist Ammunition Surveillance (QASAS) or designated representative, assists in the disassembly of ammunition and components to make inspections. Uses Ammunition Peculiar Equipment to perform mechanical and electrical tests of ammunition, rockets and small missiles. Assists QASAS or designated representative in reassembling and repackaging ammunition items. Selects, marks, and packs test samples for shipment. Performs other duties as assigned.

Qualifications and evaluation

Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration. Your qualifications will be evaluated on the following competencies (knowledge, skills, abilities and other characteristics):

Education

You must provide transcripts or other documentation to support your Educational claims. To receive credit for Education, you must provide documentation of proof that you meet the Education requirements for this position.

How to apply

To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below. To view the Occupational Questionnaire, click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/13035047 A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration. To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application. Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process. After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process. You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application. To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.

Required documents

To apply for this position, you must submit a complete Application Package which includes: 1. Your resume showing: Contact Information-your name and the best way to contact you. Relevant work experience-include the employer's name, job title, start and end dates (month/year), the number of hours worked per week and describe how you meet the required qualifications of the job. Federal jobs should include series and grade. Education, certifications or licensures. 2. Other supporting documents: Most recent SF-50 for current federal technicians.

Additional information

If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (Register | Selective Service System : Selective Service System (sss.gov)).